Question about Boston Acoustics Car Audio & Video
...amp the speaker getting wet will short it out. Shorting the output on any amp will ruin it. there is a right and left chanel with 2 outputs. Right chanel is damaged. front left channel humming ...
...right channel of the subwoofer same to other sub then conect the left possative and the right neggative to your box power terminal same to other sub then conect the two sub outs on your box left ...
...channel and it will feed both the left and right channels. To confirm that it's feeding both channels, connect the speaker to one channel at a time. With signal fed into the left channel only, you ...
...channel 2 should be stable at 2 ohm You can hook up the right side speakers together ( + with + and - with - ) . same thing with the left side. this will give you 2 ohm each channel. this will cause ...
...right. kinda hard to set the gains and match them. dual 2 ohm- run the sub stereo. one coil to one channel, the other coil to the other channel. single 2 ohm. dont use it unless you get another sub ...
Question about Soundstream Car Audio & Video
right channel keeps geting hot i change the outputs and tested all transistors and resistors and and diodes but it stills get hot and only right channel plays soft and i change the driver card and the
Question about Solid Audio Car Audio & Video
...+ and - for each channel. This tells you which channel is for pos, and which is for neg. If no markings switch for each one left pos/right neg or right pos/left neg. It will only work on one
Question about Kenwood Car Audio & Video
...right channel? If so does it still produce low sound? If you have sub / speakers connected to right channel and then connecting more to left channel, your amp may not have the umph you need to power ...
...right channel input if the output is mono? reason is there is separate bass on both input channels that you want to include in the sub channel. For example, if bass drum is on left channel and bass ...
channel instead of 4. THANKS IN ADVANCE!!!!!!!!!!!!! You would want to bridge 2 of the left channels and 2 of the right channels, essentially combining the power output of the amp. This article should
28 questions posted
Usually answered in minutes!
481 Questions
126 Questions
44 Questions
31 Questions
26 Questions