sanyo vcr player vwm 900, tape won't COME OUT. This needs a little bit of care but essentially you will need to unplug the power from the VCR then do the following: Remove the top cover Then with the ...
...ejects the tape. I put the tape in and it shuts off. What's wrong? your vcr must see the tape that has been inserted this is accompilished by three small sensors on both sides and the middle of the ...
...tape??? My Sanyo 4 head Hi-Fi VCR #VWM-800 was working perfectly well but while re-winding - rewound really Super fast like never before. When done - tape ejected. Next time it got turned on - all ...
Multiple clicking sounds when plugged in. Faulty tape load mechanism. Works OK if cover is temporarily removed. As soon as tape is ejected AND cover is put back on OR ROOM LIGHTS TURNED OFF, it clicks
i dont know where the record safety tab is It's on the back edge of any VHS video tape, it looks like a square piece of plastic which is only attached at one side. Break it off and the VCR can't ...
A video tape got stuck inside of the VCR then. Well there is a tiny button on the back of the VCR you can bearly see it but its there. So you will have to take a small flatend screw driver like for ...
Question about Philips Televison & Video
tape is free. Thanks. Charlie This happened to me with a Sanyo model but I believe this may be a universal solution. Remove the top cover and the front panel. The tape is held in a basket held down by
...sanyo VCR technician and i will share to you what i had encountered. the problem of your VCR is in the mechanism "slide front" unable to push out the ejector portion of the tape. If you can locate ...
Question about Sanyo Televison & Video
Sony model# SLV-D500P: The casset loading motor does not stop Initially the casset was not ejecting. It was taken out manually,but the loading motor does not stop turning Hi, thats is a mode switch ...
21 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions