Cassette stuck in video

What is the error code E8 on Voltas cassette AC unit?

An E8 error usually indicates a fan problem with the indoor or outdoor unit. An E8 error is usually cleared by power cycling both the indoor and outdoor unit by turning power off at the breaker. Be sure to check the indoor air filters are not dirty and blocking air flow from the fan.

Or

https://www.republicworld.com/technology-news/gadgets/voltas-ac-error-codes-list-know-the-meaning-of-all-these-error-codes-right-here.html#:~:text=F8%3A%20This%20error%20code%20shows,with%20the%20outdoor%20DC%20fan.&text=P2%3A%20This%20error%20code%20shows,the%20Compressor%20phase%20current%20protection.

What is the error code F8 on Voltas?

F8: This error code shows up only when there is an issue with the outdoor ambient temperature sensor. F9: This error code shows up only when there is an issue with the outdoor DC fan. P2: This error code shows up only when there is an issue with the Compressor phase current protection.

Mar 24, 2021

Voltas AC Error Codes list: Know the meaning of all these

https://www.google.com/search?q=Voltas+Cassette+A%2FC+2+ton.+blinking+8+times

..

ERROR CODE C-0900 AND ERROR CODE C-0950

Are you putting the cassette in the correct way round ?

take the deck apart, get the tape and put it back together or see if you can find someone who fixes decks and ask them to take the tape out

From the user manual page 28, I find that the reason this would be is that the "write protect tab" on the cassette is out. Someone has set the tab in order to keep from being able to record-over the tape or the tab has been set by accident. If you want to over-write the tape, slide the tab so that the red mark is no longer showing.
Another reason is listed on page 155, where it says the reason may be that condensation has occurred inside the camera.
The solution according to the user manual is to remove the cassette and allow the camera to site for an hour for it to acclimate to the surrounding temperature.
If a code number is displayed in conjunction with this "up arrow", you can look up the error code on page 158 of the manual.

Hello,
Looking at PDX 10 User Manual Page 232

Your description -

Under lined Triangle

Cassette Ejection needed
Slow Flashing: The Write protect tab exposed

Fast Flashing: Moisture Condensation
Cassette out of tape
Self diagnosis display function activated


Sounds like the diagnosis function maybe your best shot......
Check displayed error codes in viewfinder on Page 231 of the User Manual or let me know if you dont have copy of them.

Tape Symbol Flashing:

Tape near end
No cassette inserted
The write protect tab exposed.

I think this is basically telling you the loading mechanism has a problem, the viewfinder is displaying an error code indicating the nature of the fault..... IF error Code is : E61:........ or E62........ (dots indicate extra numbers) these MUST be referred to Sony Service Centre.

Hope this may help
Ian 561

If You know the code:
1. Turn radio On
2. Display say "Code in"
3. Enter the Code by memory station buttons (4 digits)

If You enter wrong code for the first time:
1. Turn radio off.
2. Turn radio on
3. Press and hold the band "~" button
4. Display shows ====
5. Wait till display say "code in"
6. Enter the code by mem. station buttons.(4 digits)

Important:
You mast wait by Radio ON in = = = = condition,
and not in - - - -!
The max. waiting time is 90 min.

TIP:
Tested by PU-1570A Eeprom 93C46
1. Radio Off
2. Press and hold the Band "~" Button.
3. Turn the radio ON
4. Enjoy!

ENTER A BLAUPUNKT CAR300 RADIO CODE


Switch the ignition key ON

Press and hold AS button *  and the  ON button at the same time

Display Shows SAFE  then goes to 10 - - - - with a "Beep" from the speaker

Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed

If the display  now shows the correct Code number then

Press  Button AS  and hold to Enter and if successful  there should be a "Beep" from the speaker and the radio should switch on

try factory restore settings

code indicates that you should remove the cassette and insert again, then operate camera.

disconnect power cord and battery pack. after reconnecting operate camera,