Question about Televison & Video
New Samsung 1080p TV not displaying Full 1080 from PS3 Blu Ray movies I have just purchased a PS3 80g and when I watch a Blu Ray movie it shows it in 16.9 and it has the bars on the top and bottom. I ...
Question about Samsung Televison & Video
Samsung HCN4226W have perfect sound but no picture My television began showing a red sceen with horizontal lines. Finally all of a sudden sound stayed on and screen went totaly dead. I tried adjusting
SAMSUNG TO OBTAIN THE INFOMATION TO RESET THE LAMP USE TIME. EG; IF YOUR LAMP NEEDS TO BE REPLACED, BEFORE THE TV WILL DETECT A NEW LAMP HAS BEEN FITTED, YOU NEED TO RESET THE LAMP USE TIME, OR THE TV
...new lamp first is reccommended. After all, you will need another lamp eventually. Samsung Parts http://www.samsungparts.com/ model HLM507W as two different lamp replacement part. the LAMP for my TV ...
...new lamp when mounting it in, you need a multimeter to test lamp. You need to make sure that the lamp is connected properly , so better take it out again and make sure when you put it back in its ...
Question about RCA Televison & Video
...Samsung HLN437W DLP TV I turn it on and in about a minute there is no picture or sound and you have to turn it off you have to unplug it That problem is usually have 2 causes..Its either power supply ...
Question about Samsung Televison & Video
...new bulbs fitted and made no difference. My repair man thn said it wont repair, Is it dead or can you suggest anything? looked up on this site and it seems it is a cooling issue the set is set to cut ...
...new KD board. heres the link. http://servicemanuals.vstore.ca/ tr to restore the tv to the default mode.or visit the www.samsung .com or try toadjust it yourself using the adjustment settings hello, ...
new Yamaha RX-V1800 AV Receiver. I cannot get the receiver to convert 4:3 non HD channels into 16:9. I have gone to the video options set up and set the HDMI aspect to Smart which is supposed to do it
Question about Televison & Video
...Samsung sets which might be what you are experiencing, the problem could be the capacitors on the power board where put in a lot rate to save money, they may last for a few years then die. they need ...
2,644 questions posted
Usually answered in minutes!
1,124 Questions
809 Questions
789 Questions
510 Questions
405 Questions