NetTV PDP42V Television "grundig tv signal" Questions

...Grundig elegance television comes on blue screen and says no signal, have tried it from other aerial sockets same thing, have tried other television into aerial socket and it works. V-00358800551 ...

its say no signal on tv whats at fault tv or areil You must have the wrong setting on the set. you will have Ant 1 Video 1 HDMI 1.2.3.check the settings. or RF input behind the set.

Grundig TV P37-080GB or G.CG61-02GBM bought in UK. Using Auto Tuning I can find local TV channels but the audio to each of these channels does not work. I get a hissing sound as gets when not tuned to

tv I have just just purchased a grundig 19'' widescreen hd ready idtv lcd (gu19wdv4) to work with my bush dvd / vcr recorder combi (dvhrs02). However i can get both a dvd and a tape to play but cannot

...to connect and configure Grundig GSTB3106R HD set top box to LCD Monitor with VGA input.Keep Getting "No Signal Input" on LCD Monitor Screen. Should be a setting in the TV to select the input

...tv is a Grundig thaurus(but a pdp42v5 chassie) tv turner ok, sound ok but no picture!!! signal to y and Z seems ok but X-signal i almost zero. one gren diod is flashing on the controll board. where ...

...Grundig TV GU32DVD keeps switching off but after several times of remote on & off it eventually stays on HelloCheck the remote control for its infrared signal radiation.  The remote may have ...

my grunig lenaro 32inch screen freezes whilst on channel sometimes in minutes,sometimes after an hour and I have to switch off /on to proceed- what do I need to do to fix it? Hello It is due to its ...

Grundig Tv, this IC will be an SMD [Surcace Mount Device] type. In others, it will be of norma DIN [Dual In Line] type. If the IC soldered to your tV is of fromer type, it cannot be replaced by normal

...cable or weak signal causing the stereo to go in and out. either try a new cable from the outlet (if you have a splitter, disconnect all but the tv and try it). or switch to MONO in the config