it not save my changes? After you have changed the settings, you must go to "user reset" push "enter" two more times, then power off your TV. When you turn your TV back on your setting should be saved
TV power cord from the electrical outlet. Allow the TV to remain without power for one minute. Plug the power cord back into the electrical outlet.NOTE: The TV should turn on automatically. If it does
...save time. 1. Unplug the TV power cord from the power outlet. 2. Unplug any connected devices (DVD, Set-top boxes, etc...) 3. Press and hold the TV power button for five seconds. 4. Plug the TV power ...
...sure your fans, and vents are kept clean, if they cant cool the lamp properly, it will make the lamp go out faster, also change your setting in the menue to power save, or low power, saves on lamp ...
...save time. Figure 1: Example of the reset button labeling on the LC2600N 1. Unplug the TV power cord from the power outlet. 2. Unplug any connected devices (DVD, Set-top boxes, etc...) 3. Press and ...
TV power cord from the power outlet for 3 - 4 hours. 2. Unplug any connected devices (DVD, Set-top boxes, etc...) 3. Press and hold the TV power button for five seconds. 4. Plug the TV power cord back
...save time. 1. Unplug the TV power cord from the power outlet. 2. Unplug any connected devices (DVD, Set-top boxes, etc...) 3. Press and hold the TV power button for five seconds. 4. Plug the TV power ...
...you want to save power you should only be switching tv to standby, there will still be a light on the tv somewhere, blue or red it varies. TV's turn on much faster from standby than completely
...Power Save" mode. It is not detecting any signal on the input it is set for. When you first power it on, make sure there is a signal to the input that you have selected. This normally takes about 30 ...
115 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions