i need a part number or the value of rk42 and rk50 on the 53FDX20B rk42 is a 3.9 ohm 1watt resistor. RK50 is a 2.7 ohm 1watt
65xwx20b need values for rk42,rk46,rk50,rk54,rk58,rk62 Ihave dp2x board rk50 burnt can't see colors Is this a Hitachi set? If so then check the model number and be sure it's right. i need value for ...
convergance on model r60v26 two resitor burnt rk46 and rk50 what are values and watts and best place to get parts rk46 is 1.8 ohm at 1 watt and rk50 is 2.7 ohm at 1 watt. Most any electronic supply ...
43FDX20B RK58 RK50 RK54 RK42 Values STK392-120's The following resistors need to be replaced but I'm uncertain what the values are supposed to be. RK58, RK50, RK54 and RK42, I'm ...
...this problem. It includes: (2)STK392-150 convergence ic's,resistors RK42 = 3.3 ohms,RK46 = 1.8 ohms,RK50 = 2.7 ohms,RK54 = 1.5 ohms,RK58 = 3.9 ohms,RK62 = 2.2 ohms,all 1 watt resistors. FIRST LOOK ...
i need the resistor values for RK42, RK46, RK50, RK54, RK58, RK62 when using stk392-120 chips in Hitachi 53UWX10BA. If it is 53uwx10B: RK42 2.2 OHM 1 WATT RK46 1.5 OHM 1 WATT RK50 2.2 OHM 1 WATT RK54 ...
convergence problem I found resistors RK50, RK54, and RK57 burned, would you know the values. Thanks 50k,54k and 57 k RK50 is 2.2ohm 1 watt Metal film @ 5% tolerance RK54 is 1.5ohm 1watt Metal film @ ...
...align check ik04,ik05(stk392-110,if bad,replaced with stk392-150).resistors:rk46,rk54-1,5ohm.,rk42,rk50-2,2ohm.,rk58-3,3ohm.,rk62-1,8ohm.also check line
what is value of rk46 and rk50 resistors on convergance board model no.r6ov26 zenith 60 inch rk46 is 1.8 ohms and rk 50 is 2.7 ohms.
...65TWX20B DP27D. While inspecting the convergence resistors on the convergence board I noticed that RK50 was discolored. I want to replace this resistor but I do not know what the resistor value is.
74 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions