Hitachi 50SBX78 50 in. Rear Projection Television "set auto lock" Questions

HOW TO SET TV TO RECEIVE ALL CHANNELS AVAILABLE USING THE REMOTE SETTING You need to go to the menue and then to auto prgram mode that will auto lock all chanels you can get

...set to even if you turn the TV off. Language Main Source PIP Source Captions Caption/Text ARC Key lock G Auto Convergence Auto Move F Back Next G SETUP VIIDEO AUDIIO TIIME LOCK SPECIIAL On Off With ...

...auto tune them as it does not recognize the password that was set.i tried the default code and the master code to overide it.Also tried the factory reset but it still will not let you in to auto ...

auto focus I changed the convergence board, now the perfect focus will only go to 37%. At least the set is watchable now, but is there somehow I can fix this problem? The words are still fuzzy. Thanks

...auto source finder on and on endlessly the projector turns on but it cant be locked to any source as soon as you touch one of the command buttons it start looping in the automated source finder ...

...auto lock is on the tv and it needs a code is there any way i can reset it or get a code Manual Library you should find all you need here: http://www.techlore.com/group/2/list_downloads Hope that ...

...set is un-obtainable. I require to be able to use two sets of headphones from the same TV. Can this be done using the existing base? You can use a spliter that turns one output into two so you could ...

...problem is you can not lock the fine tuning (in manual procedure) but is it better to set the program to AUTOSCAN OR AUTO PROGRAM and authomatically tune and save to the memory all the program ...

...auto channel memory completed 6" letters appeared indicating CHILD LOCKED, using a one4all universal, menu functions okay, PIP will show momentarily while demonstration is ongoing,tried just about ...

...set will turn off and come back on channel 3 in air band---you will have to select cable and auto program it but it should restore the speaker and all settings to default. If you want the code for ...