...7200.10). I made the dreaded mistake of plugging in the wrong power supply. Have pulled it apart and tried the hard drive in another case, but still won't fire up. Apparently it is the AV ...
Question about Seagate BARRACUDA Computers & Internet
...and using different power and data cables? Perhaps in a different machine? Is this IDE or SATA? Apart from that you may find your only solution to be sending the disk to a data recovery
Question about Seagate BARRACUDA Computers & Internet
...722.10 light flashing but hard drive not runing,lots of data on it to retrieve,can i take it apart and run disk in cd/dvd drive or can i get new boards for it.and will it work if i change ...
Question about Seagate BARRACUDA Computers & Internet
...computer, if the problem follows the drive, then the drive is defective. You could take the case apart, and make sure the cabling is properly seated. Have seen an external drive where the
...white box that is clicking is supposed to click. It's the On/Off Relay. I have the same model torn apart right now...and my problem is that the very same relay DOESNT click. I need a new
...the outside that the master belt cable hooks in to a circuit board can i change that my kid took it apart not the insides of the harddrive just the part or circuit board thing thanks ED You will need ...
Question about Seagate BARRACUDA Computers & Internet
...also. All hard drives are slightly different so take your time and inspect how the drive comes apart before you disassemble it. If all else fails you can take your drive to a computer repair
Question about Seagate BARRACUDA Computers & Internet
...data recovery for a novice computer user is nearly impossible it includes taking parts of the hd apart buying new (exactly the same) replacement parts which can be difficult and somewhat expensive
Question about Seagate BARRACUDA Computers & Internet
...and see if the little pin wiggles, if so the jack is bad. You'll have to take the laptop apart to fix it. Most times it is soldered onto the motherboard, so you will have to desolder ...
...will not recognize my external hard drive the external hard drive's motherboard is burnt take it apart (this will be a little hard but it will come apart) after you take apart u will see it is
11 questions posted
Usually answered in minutes!
161 Questions
116 Questions
74 Questions
22 Questions
19 Questions