Pioneer SD-P50A3-K TV "television protection mode" Questions

television turns off immediately after turning it on. I believe it is what you described as going into protection mode. Especially since I had been playing with the convergence just a week before that

no picture . tvturns, immediately turns off As soon as I turn the tv on. it immediately turns off.why? mitsubishi vs-50605 Your TV set is in protect mode .To protect further damage of some component ...

i have a kp57ws500 and the stand by mode and the red light flashes 6 times The TV has gone into "protect mode" and the flashing light is indicating a error code, TV will need a service call. Good luck

...mode. Short circuit of +B line" 2 blinks is +B OCP protection. The manual states "Short circuit of power supply system in each circuit." and "Goes to the standby mode. Short circuit of +B line" What ...

...mode, it means that there is a fault. In that case call the support number listed on Philips user manual to arrange repair. If you are a technician I can try locating parts, service manual and giving ...

...television model 62DC1D-AB switches on then keep switching off and the symbol looks like a flashing light globe what does this mean Hi, Your LG HDTV is in protect mode that why you can see light .To ...

hitachi 60'' rear projection wont power on My tv when powers on stays on for a split second and when took back cover off i found 5 green leds lit up but 1 green led did not lite up... then red led ...

green timer light wont go away house lights flickered a couple of times last night , tv went off, now only green timer light flashes, tried reset , unplugged over night , still flashing Hi. The TV is ...

...television has run its and its not worth fixing. I would invest in a new HDTV. The TV shuts down because it goes is in protect mode. The TV does not turn on because there is an internal problem, like ...

mode, that means that an internal fault is detected. Troubleshooting consists in leaving TV unplugged from power, and restarting with no device connected. Try following indications here:The click that