Clarion APX401.2 Car Audio Amplifier "wire remote" Questions

...remote wire/the amp.only works when the power wire is connected to both remote and + terminal,but does not work without remote wire.Is there some lack of power from the remote wire.the amp works fine ...

...remote wire in with the ground and power wire plugged in tight, i'll wiggle the remote wire and the heat and power safe lights flash on, but if i just leave the remote wire in the fan will spin ...

...remote wire connected and remote turn on switch set to on. The protect power light is green help! Can't figure it out U need to hook your remote wire to a wire that is power to it only when your ...

...REMOTE WIRE FOR AN AMPLIFIER FOR A 99' THE REMOTE WIRE FOR AN AMPLIFIER FOR A 99' CHEVY TAHOE The switched 12V+ wire (remote wire) on a '99 Chevy Tahoe is a yellow wire. The orange wire is the ...

remote wire hook up My punch amp is hooked up to the battery & is grounded.It does not power up so my question is does the remote wire go from the amp to the battery (Which does not have any juice ...

...remote wire to the remote port on the amp. The remote wire turns your amp on when turning ignition on and turns amp off when turning ignition off. This wire needs to be connected as without it, you ...

...unit is the remote link to a which wire on the alpine cdm 7829 head unit is the remote power link to a remote power amp . This would be the wire that turns remote amp on and off. Thanks ITS THE ...

...remote wire to a switch that is conneted to 12 volts. or u can also instal a eq and use the remote wire that is on the back of that more than likely that should work but if u lookin for a cheap fix ...

...remote wire do u have an aftermarket deck?? cuz baby blue wire usually is ur remote YEAH THATS CUZ YOUR WIRE IZ NOT ON REMOTE YOU DO HAVE IT TOUCHING A 12V TAKE IT OFF AND PUT IT ON YOUR REMOTE WIRE ...

...remote wire supose to be connected to? The remote wire is supposed to be connected to the remote output on the back of the head unit that is feeding the amp. Without the remote wire hook up the amp ...