...metal lever that connects to the area under the shutter mechanism. It should pop into place and close the shutter. Don't fool with it yourself. You could make the problem worse and more expensive to ...
...the shutter as the shuuter curtains are either fabric or metal. If you can't post a photo, then by all means take the camera to a repair shop and they'll tell you what the part is and where it
...shutter or advance film if the re-wind button is not stuck in, then the tab on the advance shaft is broken off. this small piece of metal will jamb the gears eventually. take or send your camera to a ...
...shutter works and jammed it in this mode. You will have to open it up to see what this is. It is quite likely that the offending something, is one of the synthetic rubber bumpers fitted to make the ...
metal peice on the bottom of the chamber that the lens shutter gets moved with is where I'm thinking lies the problem. If I put some pressure on it and press the shutter button, it will take a picture
...metal shutter of previous XE and XD cameras, and was instead fitted with a less expensive horizontal fabric-shutter curtain shutter operated by simple electromagnets. This resulted in a rather slow ...
...shutter will stay open as long as the release button is kept pressed down. The closing curtain will close as soon as the release button is released. When the magnet fails, both curtains travel across ...
...shutter speeds will be accurate. Also, be SURE to check the lens glass CAREFULLY under a bright light--when cameras and lenses are put away for long periods, an insidious fungus just loves to attach ...
...shutter itself, and is made from very thin metal. If you have bent or damaged this when cleaning it, you will have probably scrapped the camera. This can be changed, but only really by a repair shop. ...
130 questions posted
Usually answered in minutes!
101 Questions
31 Questions
21 Questions
19 Questions
14 Questions