Mitsubishi VS-45607 45" Rear Projection Television "signal board shield removal" Questions

signal board. Remove the small screws around the the EII inputs and slide the board out of the shield cover. Once the cover is removed, you should be able to see the capacitors with the tops popped up

...signal board from the unit. Unsolder the Tuner from the board( If I've lost you already, call a TV shop for repair) Remove the shields on the tuner and inspect for damage to the tuner itself. If the ...

...signal board. You can't see it unless you remove the shield cover. There is also a plate cover on the underside of the signal board. It's soldered on. This information will help identify your ...

...signal board. the metal shield (or metal box that is part of the board is soldered under neath) hense it cannot become (UNSEATED) don't know were you heard that as techman said there are 11 ...

...board from the TV(lots of screws and connectors,takes time) You must do some checks first:LED does not stop blinking after plug in. Verify the standby supplies, 12-volts at connector KA pin 17, ...

...board from the TV(lots of screws and connectors,takes time) You must do some checks first:LED does not stop blinking after plug in. Verify the standby supplies, 12-volts at connector KA pin 17, ...

...board from the TV(lots of screws and connectors,takes time) You must do some checks first:LED does not stop blinking after plug in. Verify the standby supplies, 12-volts at connector KA pin 17, ...

...first board is the FMT. The second is the DM, third is the Signal and the one which is sideway across the front is the Power board. The Chassis metal shields have to be removed to access the

Signal Board and unsolder the center connection of the broken connector left on the Board. Remount the new Connector and solder the center connection. You may need a collar nut to secure the Connector

...board from the TV(lots of screws and connectors,takes time) You must do some checks first:LED does not stop blinking after plug in. Verify the standby supplies, 12-volts at connector KA pin 17, ...