Mitsubishi WL-82913 82" Rear Projection HDTV "tv solid red status" Questions

...tv's require fans, to prevent overheating and causing damage. If "STATUS" LED is solid RED: 1) Circuit failure (short) 2) Disconnected DVI cable, chassis to engine 3) No LAMP-EN signal from Engine to ...

...TV with a solid red status light on the front. Used the Device and the menu buttons to get the 41 error code. Error codes seem to indicate a "short" of course that's not helpful at all. Where do I ...

...to red lamp Turned on TV and had no picture. Now when I reset I get green blinking light then solid green status. After about 30 seconded red lamp light comes on. Is there a solution? check the ...

...screen green flashing timer for two minutes then solid red light for bulb you may be on the incorrect input channel. look for an input or tv video button and choose each input until u get a ...

...TV turned on and everything seemed fine, but after about 2 minutes it shut back off and now all I can get is a Red solid status light with an error code of 41. If I end up finding anything I'll let ...

...TV worked fine after words. A steady red light: there is a short on the DVI cable from FMT to DMD disconnected Mitsubishi V26 error code 41 with solid red status indicator is caused by leakage from ...

...TV game me the same solid red light lamp failure code. I took the module out and had a TV repairman look at and fix any abnormalities (it tests fine) but the TV doesn't work? I then switched out the ...

...TV Status light comes on shortly after turn on and stays solid red Using error code test I get 4 or 44 from the blinks. Can not find any detail of what that error code is That is an Open(blown) Check ...

SOLID RED ON 73 DLP MITSU MODEL WD73735 Need expert advice on the above problem - status light is constant red- we unplugged power and reset, tv green light comes on and then shuts off when red status

...tv not working after replacing 2 different lamps? does the lamp indicator light as red? let me know what the status light does...is it blinking or solid give me some info and I should be able to help ...