Patton Electric Patton PUH680-U Electric Utility Heater 1500-Watt "heaters heat 1" Questions

Heat 1 & 2 Heat 1 and 2. Which does what? Typically 'Heat 1' means first stage heat and 'Heat 2' means second stage heat. Essentially a Lo and Hi setting. Just like a hair dryer.

...heat cabin in winter That would be due to one of three possible issues. 1. Thermostat is stuck open. This should also show on the temp gauge if you have one. 2. Heater core partially clogged. This ...

...heaters replace heating element related questions and answers. Ask yourPatton ... I can't seem to find a phone number for the manufacturer to call for parts. Any help? ... Question about PQH307UM ...

...heat up and the reset button does not do anything depending how good your are with electric and brave. I would take a jumper wire and jump around each switch or control unit 1 by 1, but remember you ...

...1-877-397-6622 (CA) or 1800 239 766 (AU). An infinite number. However, the consumption is 2KW at full power, therefore it will heat any room that can be heated by a 2KW heater. The advantage is that ...

...1/3rd less heat!)-- compared with the 1,500 watt setting. If you have to run this heater on an extension cord (NOT RECOMMENDED I might add!)-- the lower wattage would be the safer, and more efficient ...

...1', with off being '0'. Otherwise, on can be symbolised with a staright line with circles on it, while off is like a little barrier-arm part up. As for the knobs on the heater, one is for the amount ...

heat. click the link 1 by 1 and check out for reparing instructions http://www.mypros.com/how-to-know-you-need-electric-furnace-repair-1-239 for electric heating furnace. http://www.toad.net/~jsmeenen

...heaters are all working ok. The model no. Dimplex XLS18N Hi in side the case on the left hand side there is a reset looks like a flat pieceof metal push this it will make a loud click this should ...

heaters to heat my home and had an electrician install. I realize they're typically slow to heat, but they don't seem to be able to keep temps above 50 degrees. What are the possible reasons for this?