Brother PE770 Computerized Sewing Machine "fix needle down" Questions

...fix this? Check the needle thread tension. If the tension is too tight, the needle will not be able to move up or down. To adjust the tension, turn the tension knob on the side of the machine. Turn ...

...fix Needle broke, #10 sewing juki dln 415-- timing fix Needle broke, #10 sewing on light weight material. Now the feed dogs are not aligned with the needle as it drops down. The needle hits early by ...

...fix thread from top to needle Always start from the thread spool pin, install your thread spool to the spool pin & put on the spool holder, pull end of thread to go thru the top thread guide then ...

...suggestions on how to fix this? On older machines that do not have the automatic needle-up feature, the user needs to manually adjust the needle height so the threader will match the needle eye.

...needle is moved up or down? Five Common Sewing Machine Mistakes + How to Fix Them www.tillyandthebuttons.com/.../five-common-sewing-machine-mistakes-... Sep 23, 2014 - Sometimes the needle will push ...

your hook should pass just above the eye of the needle. At no time should the needle hit the bottom of the hook assembly. This requires some special tools and skills to fix find an expert in your area

...needle up and down. If you've checked all of these potential issues and still can't identify the cause of the problem, it may be worth taking the machine to a professional for further diagnosis and ...

...needle down by hand. Every time switch machine back on . Makes a noise then says power down again.Needle seems to move ok by hand it is not stuck. you may have knocked it out of time. when you heard ...

...fix timing on a juki ddl-555 sewing machine Hi, if your ddl-555 sewing machine the needle doesn't grab the string from the top and bottom; and it can't sew the fabric. Do you know what to do/ HI U ...

...needle will go down, but not come back up. Please, anyone ever have this problem, and how do I fix it? Unfortunately you are probably not going to be able to fix this. It needs a sensor adjusted ...