Kenmore 42822 Front Load Washer "he3 spin finish cycle" Questions

...finish cycle Hi, If you are having a problem with your top load washer then check out this tip... Washing Machine does not Pump or Spin ...

spin kenmore elite HE3 washer mod.#11042822202 won't go to final Drain/Spin automatically must push Pause,Drain/Spin,then Start to finish cycle I am in Auckland,New Zealand with machine that I brought

HE3 washer now takes 2 hours to run a 'normal' 45 minute cycle. It will display 1 minute remaining and slosh the clothes back and forth for a while. When it finally finishes the clothes still seems to

...HE3 my washing machine is dripping water into the drum after the load is finished. It appears to be going through the cycle fine, but water keeps dripping into the drum. I don't know if this ...

...HE3 washer. We cleaned the pump filter and ran the washer through a rinse/spin cycle. Got one F02 error, but we re-started the cycle and it finished. Pulled the drain filter again with no clogs and ...

...spin cylce, but the machine only filled with more water and the error code came up again. Any suggestions? I have a Kenmore Elite HE3 front load washer model # .44836300. Thanks F2 error code 11 ...

...he3 model 110.45872.404 during operation no codes door will not close to start new load at 1st was stopped in final spin but did not work due to door open, held button to indicate door closed to ...

...HE3 washer (Model 110.44832200) that we purchased in 2004. Recently we've noticed that it takes almost 2 hours to finish a load of clothes. No error messages show up during the cycle. It appears that ...

...HE3 front load washer. I have verified that all drain lines and the basket are clean, free of blockage, and functioning properly. It goes through the cycle and stops with 11 minutes left due to an F2 ...

...spin/rinse cycle the washer made an aweful pounding and banging noise. It was so loud I heard it from the other side of the house and went running to see what it was. I had top stop the cycle cause ...