GE 24 in. Profile PDW9800J Built-in Dishwasher "washer start button" Questions

door won/t lock to start washer by pushing all the buttons am finally able to lock the door to start the washer by pushing all the buttons the door finally locked and the washer started, thanks anyway

...start button for about 3 seconds. THe washer will run for about 5 seconds and then turn off (do not have the heated dry setting on when you do this). Turn it off (turn the dial), and then try to ...

...washer to start one hour (maximum delay of to 24 hours) later. Then press Start and close the washer door. If you press and hold the Start button for 3+ seconds, you will cancel the wash cycle ...

...you need. for 5seconds. eg try starting washer as normal but hold the button for 5secs....(Ps you may be needing to press 2 buttons at the same time to take lock off but i dont know witch 2

...washer, but nothing happens when the start button is pressed. jamcdani Most likely the problem with your dish washer is bad key pad. It is not repairable and has to be replaced. Whirlpool does not ...

...washer won't operat... Start light keeps flashing but washer won't operate. Tried to reset by hitting cancel button but start light keeps flashing. Check whether inlet water is flowing into the ...

...washer isn't coming on is the lock symbol showing in the lcd badge when it's not back lit can be hard to see ,if it,s showing push lock button till it beeps release immediatly now try power button or ...

...START button for washer to work. If I do this it will then pump out any water in the bottom and start to work. ***BUT when you take your finger of the POWER button the washer just turns off and stops ...

washer won't start The rotary start knob seems dead and washer won't start in any position. All the on/off select button lights work. On the Maytag Jetclean II, this problem can be fixed by replacing ...