GE Spacemaker JVM1640SJ Microwave Oven "fan works low" Questions

...fan is too slow. High is equivalent to low on my previous ge xl 1800. The boost button works just as good as my previous one but the hi med and low are extremely slow. Low is almost not even on. Is ...

...works fine when the fan switch is turned on. the fan cap checks out fine the diodeon the larger capacitor is open circuited in both directions, i dont see how that can be related If you have had ...

it in. The exhaust fan turns on low speed and won't turn off!! Any help would be appreciated. Thanx, The fan may need to be replaced, and or the drive circuit to the fan has a fault condition. Jerry G

...fan and heat simultaneously stopped working but everything else works. Because of its age, I am thinking that I should just purchase a new microwave. Is this the best solution? The average cost of a ...

fan blades move freely, check for a burning smell and examine the motor windings for discoloration. If a wire is loose or broken, repair the wire connection. To test the motor for less visible damage,

...fan works as intended, however whenever the keypad is pressed or the workstation light is turned on, a low volume buzzing noise is heard. The microwave was manufactured in July 2001. Serial number ...

...fan only works on high and medium setting the low quit working a few months ago. Anyone have similar problems? We see (and repair) this a lot. The problem is on the control panel, which we regularly ...

...fan, etc.), but there's no heat. When I press the "1" (express cook) everything sounds fine for the first second, then when the display switches from "EXPRESS" to start the timed count-down, an ...

...fan stopped working but oven works fine. Is it the fuse? If so, how and where do I change it? I can't find the manual from the previous owner. had the same problem (self induced) and shorted out the ...

...was getting the "Vent Fan Off" message, and despite the fact that everything else worked fine with the microwave, I turned the breaker off and back on from my electrical panel. The fan works fine