...replace the top mounting nuts (the ones with the clip) from the outside? (without removing the housing) Your best bet is to refer to the installation instructions.; If you don't still have them, you ...
Question about Frigidaire Microwave Ovens
replace them? Could the holes in the top of the microwave be the problem, are there nuts or brackets that the bolts thread into? In the top of the microwave they have nuts with clips on them that snap
...replace with a new one. It has a plastic box mounted in the brick .I disconnected the white and black wires and noticed the ground wire just lying in the box, not connected t. When i hook up the new ...
mounting my microwave hood combo I pushed on the top mount set screw and accidentally pushed the retaining nut out and into the microwave case. It is unretrievable unless I take the whole thing apart.
...replace my Kenmore slide-in electric range, model #991.4674990 and need to know if it is hardwired or plugged in. Can you help me? Every range I have seen has wires that extend beyond the slide in or ...
...electrical interference and disruption in the control circuit board. If your magnetron was recently replaced, it may have loose mounting nuts or bolts or the wire mesh RF gasket was not installed or ...
...electrical interference and disruption in the control circuit board. If your magnetron was recently replaced, it may have loose mounting nuts or bolts or maybe the wire mesh RF gasket was not ...
...causing electrical interference and disruption in the control circuit board. If yours was recently replaced, it may have loose mounting nuts or bolts or the wire mesh RF gasket was not installed or ...
...causing electrical interference and disruption in the control circuit board. If yours was recently replaced, it may have loose mounting nuts or bolts or the wire mesh RF gasket was not installed or ...
62 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions