Lexicon Alpha Personal Recording Studio "mono mic" Questions

mono jacks will work fine on the inputs, any guitar or mic lead will work a treat. You can use stereo jacks for the outputs too, but to keep it simple just use a mono jack in the L out and a mono jack

...mic input on your soundcard try using the auxiliary input. You will need a cord that converts from 1/4" mono to 1/8" stereo. That cord goes from out on your pedal to aux in on your computer. Use ...

...MONO jack. 1. Turn knob (beside "mic.in") "mic.volume" (T-7) full clockwise. 2. Press "MIXER" (C-7). 3. Press "<" (R-17) while is shown "MIXER PART>:EXT(M/I) 4. Set (check) Part [ ON] Volume: ...

...mic is not clear, they are not interchangeable. You would obviously plug the headphones into the headphone jack. The knob labeled "Phones/Control Room" will control the volume without changing what's ...

...mic, then only one side will record unless you set for mono recording and then dump the recording into stereo voa Cubase. I would recommend you get a small mixer... even a 4 channel one to use ahead ...

...mono channels. Or are you taking about the phono stereo tape input? The stereo channels are line level whereas the other channels have both line and mic level inputs, what are you trying to put ...

...series 1402-VLZ 14 channel mic/line mixer The mixer is stereo and the amp is mono. The line level out of the mixer MAY overwhelm the KB2 regular inputs so try running the mixer into the PA input

...need a stereo splitter to then go into separate jacks or maybe tape input on the PMP. Plugging in a mono jack shorts out one side of the PC audio out. Make sure you use a splitter type and NOT a 1/8 ...

...mic channel is MONO. You could use a 1/8 stereo splitter cable into two mic channels and then PAN them opposite to retain the stereo. You can also use a splitter cable into the 1/4 inch stereo inputs ...

...mono device you MAY have a problem of grounding out half of the drive internally. ALSO please read my tip on here regarding a polarity hazard of speaker cables of PMP amps if you do NOT have Speakon ...