Question about Nordic Track Exercise & Fitness
...end of the motor or the right hand side of the front roller. The optic disk spins between two sensors on the optic switch. The disk must spin freely without touching either sensor. The sensors can be ...
...end of the motor or the right hand side of the front roller. The optic disk spins between two sensors on the optic switch. The disk must spin freely without touching either sensor. The sensors can ...
Question about Fitness Giant Exercise & Fitness
...front roller pulley and the frame of the treadmill. It is a small plastic piece approx 1 1/4? long and 1/4? in diameter with a black wire coming from the back of it leading to the electronic board in ...
...end, this is what fixed the problem: (This will be easier if you use a friend).1. Remove the shroud on the motor (at the front of the treadmill) by loosening two screws at the front and one on each ...
...front of the machine next to the power cord. Remove the plastic housing cover from over the motor and drive board. Inspect the motor brushes and commentator: Remove the two dome-shaped round plastic ...
...end treadmills come with 3.5-inch rollers. Larger rollers also result in less stress on the bearings; a 3.5-inch roller will need to rotate roughly 60 percent less than a 2-inch roller to cover the ...
Question about Proform Exercise & Fitness
...sensor on an electronic treadmill is most likely located at the front roller near the motor assembly, where it counts each revolution to calculate speed and distance. If that sensor begins to ...
104 questions posted
Usually answered in minutes!
52 Questions
40 Questions
32 Questions
10 Questions