Kenmore 30172 / 30174 / 30179 Gas Single Oven "adjust oven flame" Questions

adjust the flame on a hotpoint oven theres no flame adjustment as such,if the oven was on natural gas(in town) and has been changed to propane type gas(in the country) and the orfice spud has not been

...double checked everything and followed instructions to the letter! My problem is the flame extends 3 to 4 inches beyond the baffle. Why? MY KENMORE OVEN BURNER FLAME IS TO HIGH AND IT WILL NOT TURN ...

oven. The other thing you could do is adjust the height of the pilot flame... there's usually an adjustment screw near the button described above which will allow you to adjust the height of the flame

...oven, along with the ignighter, now my flame is way to high. I have already tried to adjust the air valve. Please help. You must adjust the orifice on the safety valve with a 1/2 inch wrench. Tighten ...

...Oven flames are huge and orange. How do I fix this? I may need to adjust the air flow shutter, but it doesn't move even after removing the screw, and it is all the way open. What should I do and is ...

oven DOES NOT get hot Might be a bad sensor or spud out of adjustment and the flame is too low. The nut to the right is the adjustment turn ccw to increase flame. Your sensor number 17 could be out of

...oven has just started to play up. It ignites and just will not adjust from it's low flame status. You can turn the control knob from 1 to 9 but it will not adjust the flame control at all. Usually ...

oven flame is yellow There is an adjustment on the burner assuming that the top side burners are ok. Getting to that adjustment may be a pain, so look for a screw on the metal sleeve on the end that ...

also be set too low; if the pilot is lit but the oven isn't catching, adjust the flame. Newer gas ovens use electric ignitors that produce sparks. If the oven doesn't heat, the ignitor could be broken

...oven MOD# MST43RE White flames and a lot of black..... gas fuel mix not good... I adjusted the air mix, main burner was full of black stuff inside so took the air compresor and cleaned it good. Now i ...