20 Most Recent Kenmore 33464 / 33465 / 33469 Gas Single Oven Questions & Answers


you may have a bad display board or just a bad solder connection on it. Either way, if you don't have any electrical skills, this should be done by a qualified technician.

Kenmore 33464 /... | Answered on Feb 02, 2015


Hi. your assessment is correct. when you have normal operations with the stove top and the control panel is blank or non operational, this will confirm either a wiring harness issue or a dead control circuit board. The wiring harness can sometimes become lose or the connectors can become corroded but, in this issue, i am sure its the ECB(electroninc control board). In this case, you will have to replace the board it self.

Please rate and god bless:)

Kenmore 33464 /... | Answered on Jul 18, 2012


If it's a new model it has an electric ignition. No pilot.

Kenmore 33464 /... | Answered on Dec 18, 2011


The control is automatically set to turn off the oven after 12 hours baking or 3 hours broiling should you forget and leave the oven on. If you want to remvoe this feature do the following steps: 1. Press and hold, at the same time, the BAKE and BROIL buttons for 3 seconds, until the display shows "SF". 2. Press the DELAY START TIME button. The display shows "12Shdn" for 12 hour shut off. Press the DELAY START TIME button again. The display will show "no Shdn" for no shut off. 3. Press the START button.

Kenmore 33464 /... | Answered on Dec 18, 2011


Verify that the Whirlpool oven is connected to its power source. The oven may sometimes lock down if experiencing a power surge or similar electrical problems. Additionally, check that a fuse hasn't been blown in your home's fuse box. Some older homes may not have the proper wiring to support a high-powered appliance such as a Whirlpool oven. If you are not sure if your wiring is sufficient, consult a local electrician.
  • Check to see if the Whirlpool oven's Control Lock has been turned on, a safety mechanism designed to lock the oven and disable its keypad and display controls. A padlock symbol will be displayed in the corner of the Whirlpool oven's front display panel if it is locked. The oven will not unlock itself on its own even if it is disconnected from its power source. To disable, press and hold the "3" button on the keypad for five seconds until the padlock icon disappears.
  • See if the Whirlpool oven is engaged in its self-cleaning cycle. During the self-cleaning process, the stove will lock its front door and will flash "OVEN LOCKED" on its front display. This is to prevent users from accidentally opening the oven and burning themselves during the high-heat segment in the cleaning process. If you must open the oven, first stop the process by pressing and holding the "OFF/CANCEL" button on the stove's control panel. If the oven remains locked, wait for the internal temperatures to decrease. The locking mechanism is temperature controlled and will not unlock until internal temperatures have cooled.
  • Contact Whirlpool's service department if your Whirlpool oven remains locked and you cannot troubleshoot it or open it. All Whirlpool self-cleaning ovens are covered for five years after the original purchase date. Call the warranty team for assistance by dialing toll-free (800) 253-1301 in the United States, or (800) 807-6777 in Canada. Be prepared to give the oven's model number and purchase date
  • Kenmore 33464 /... | Answered on Dec 11, 2011


    Hello, pion

    I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this Informational site may not have your exact model or brand, this site will help you a lot. Here is a site link about everything you want to know about ovens and possibly yours, from
    repair to trouble shooting it. Now go easy on me, I am just trying to help. If it does great if not, I am sorry.


    http://home.howstuffworks.com/how-to-repair-an-oven.htm




    Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

    Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.

    Thanks, Mike


    http://beta.fixya.com/users/mc1bean

    Kenmore 33464 /... | Answered on Oct 28, 2011


    Hello, christy

    I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this Informational site may not have your exact model or brand, this site will help you a lot. Here is a site link about everything you want to know about ovens and possibly yours, from
    repair to trouble shooting it. Now go easy on me, I am just trying to help. If it does great if not, I am sorry.


    http://home.howstuffworks.com/how-to-repair-an-oven.htm




    Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

    Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.

    Thanks, Mike


    http://beta.fixya.com/users/mc1bean

    Kenmore 33464 /... | Answered on Oct 28, 2011


    Hello, shorty

    I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this Informational site may not have your exact model or brand, this site will help you a lot. Here is a site link about everything you want to know about ovens and possibly yours, from
    repair to trouble shooting it. Now go easy on me, I am just trying to help. If it does great if not, I am sorry.


    http://home.howstuffworks.com/how-to-repair-an-oven.htm




    Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

    Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.

    Thanks, Mike


    http://beta.fixya.com/users/mc1bean

    Kenmore 33464 /... | Answered on Oct 28, 2011


    Hello, mm

    I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this Informational site may not have your exact model or brand, this site will help you a lot. Here is a site link about everything you want to know about ovens and possibly yours, from
    repair to trouble shooting it. Now go easy on me, I am just trying to help. If it does great if not, I am sorry.


    http://home.howstuffworks.com/how-to-repair-an-oven.htm




    Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

    Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.

    Thanks, Mike


    http://beta.fixya.com/users/mc1bean

    Kenmore 33464 /... | Answered on Oct 28, 2011


    Hello, mb

    I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this Informational site may not have your exact model or brand, this site will help you a lot. Here is a site link about everything you want to know about ovens and possibly yours, from
    repair to trouble shooting it. Now go easy on me, I am just trying to help. If it does great if not, I am sorry.


    http://home.howstuffworks.com/how-to-repair-an-oven.htm




    Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

    Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.

    Thanks, Mike


    http://beta.fixya.com/users/mc1bean

    Kenmore 33464 /... | Answered on Oct 28, 2011


    Hello, riva

    I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this Informational site may not have your exact model or brand, this site will help you a lot. Here is a site link about everything you want to know about ovens and possibly yours, from
    repair to trouble shooting it. Now go easy on me, I am just trying to help. If it does great if not, I am sorry.


    http://home.howstuffworks.com/how-to-repair-an-oven.htm




    Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

    Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.

    Thanks, Mike


    http://beta.fixya.com/users/mc1bean

    Kenmore 33464 /... | Answered on Oct 28, 2011


    Hello, salvatore..... I know yours is gas, but this might help.

    I was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and fartherback, It appeared that no one answered some of them, So, I thought Iwould take some of my personal time to see if I can help. Even though this sitemay not have your exact model or brand, this link will help you tons. Here is alink to about everything you want to know about your oven, from
    repairto trouble shooting it. Even pictures and video's. Just scroll around and youwill see tons of information to almost any question you might have on yourOven. If you go to this link and click around, I am sure you will find out somuch about your oven, you will know more than the company that made it. Thegood thing about this link is, then you can make the decision of DIY or hiringa pro. Here Is the link for you to click on>>


    http://home.howstuffworks.com/dishwasher.htm




    Please if this helped you at all, if you can find the time to rate my help andsome kind words written would be appreciated for my free help , I wouldappreciate it. Here is also my direct link to my own pages of other areas of myexpertise for other problems you might have in Automotive,Appliance, andElectronics. Drop In anytime for my help. Thanks, Mike

    http://home.howstuffworks.com/how-to-repair-an-oven.htm



    Please if this helped you at all, if you can find the time to rate my help andsome kind words written would be appreciated for my free help , I wouldappreciate it.

    Here is also my direct link to my own pages of other areas of my expertise forother problems you might have in Automotive, Appliance, and Electronics. DropIn anytime for my help

    Thanks, Mike


    http://beta.fixya.com/users/mc1bean

    Kenmore 33464 /... | Answered on Oct 28, 2011


    Hi,


    Before you go working too hard to get you oven to go into the self clean mode(self destruct)....check out this tip...

    Self Cleaning Oven Problem


    heatman101

    Kenmore 33464 /... | Answered on Mar 14, 2011


    if you open the bottom draw,on the frame you should see amodel number and serial number,all you need is a model number,most likely it will be the ignitor,pull out the racks,lift up the floor and you'll see the ignitor,first unplug it or shut down the breaker.remove the screws that hold the ignitor in place,if you don't see an ignitor it might not have one,but if it does take out the screws and pull the wires out,there should be a plug or wire nuts,disconnect them and check it with a meter,if it's bad change it out,first get back to me with the model number,if the top lifts up where the burners are the number could be up there too.don't force the top up,if it's tight and doesn't seem like it doesn't lift don't force it.

    Kenmore 33464 /... | Answered on Mar 05, 2011


    F1
    touch pad / ERC test
    This simple test will help determine
    whether the ERC (Electronic Range Control or Clock) or the touch pad is
    defective when F1 error code is present.

    Note: Some models
    incorporate the touch pad in to the ERC as a single assembly, in which case this
    test is not necessary. Simply replace the ERC (Clock).

    Warning: If
    you feel in any way uncomfortable performing this test or making this repair,
    please contact a qualified appliance repair technician.

    1. Disconnect
    power to the range (unplug the range power cord or turn the power off to the
    range at the circuit breaker). It is very important that the power to the range
    has been disconnected, so please double check before continuing.
    2. Gain
    access inside the control panel.
    3. Disconnect the touch pad (also called
    keypad or membrane switch) ribbon from the ERC.
    4. Make sure there are no
    lose wires, or anything else that may cause a short when power is turned back
    on. Assemble the control panel back the way it was.
    5. Turn the power back
    on.
    6. Wait for at least one hour to see if the F1 code comes back (usually
    accompanied by a beeping sound).
    7. If F1 comes back, replace the ERC. If it
    does not, replace the touch pad.

    Kenmore 33464 /... | Answered on Dec 26, 2010


    Hi,

    The ignitor is not working right and is going bad....
    have the repair man replace the ignitor, or DIY....
    Check out this tip about your problem...

    Oven not Working or Oven not Heating

    Oven Problems Replacing the Igniter


    heatman101

    Kenmore 33464 /... | Answered on Nov 24, 2010

    Not finding what you are looking for?
    Kenmore 33464 / 33465 / 33469 Gas Single Oven Logo

    68 questions posted

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Ovens Experts

    Brad Brown

    Level 3 Expert

    18166 Answers

    Marvin
    Marvin

    Level 3 Expert

    85223 Answers

    Mike

    Level 3 Expert

    4369 Answers

    Are you a Kenmore Oven Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...