Sweep Hand Stopped The second Sweep hand appears to be stuck and sometimes will twitch as if it was trying to move. The watch itself still runs and is accurately telling time and the calendar function
Sweep 2nd hand operation & watch time setting on my Pulsar watch. After setting the time on my watch, the sweep second hand stops unless I press one of the buttons. Even when I do, it will stop after ...
...hand moves in short jumps rather than a smooth sweep or a second-by-second hop, it means that the battery is about to run out. Usually, with a week or two the watch will stop working altogether. You ...
second hand sweeping five second increments my luminox second hand recently started sweeping in five second increments. is this a battery problem? Yes, it is sign for time to replace the battery. Your
hand that moves to count the seconds. If the hour and minute hands are not moving there is a possibiliy that the battery has died. If after the battery is replaced and the hands still do not move then
Question about Festina Watches
...be? Many thanks, Damian The large sweep hand is not the second hand,it is the 1,100th sec hand on chrono.The second hand during time mode is the small dial at the bottom which should be going ...
...hand will not zero out on the 12 To set the sweep arm pull the stem and crown out to the first or second set position then press and hold down the start button. The sweep arm will move into position ...
Question about Jacques Lemans Watches
...then the stopwatch minute hand stops moving when second hand reaches 1 circle. You need a hand alignment at the very least. Sounds like your sweep arm is getting stuck on other objects in the
sweep second hand, the minute hand for the chronograph and the hour hand for the chronograph. Don't confuse these with the min and hr hands that tell the time. Pull the crown(not bezel) out to the
298 questions posted
Usually answered in minutes!
44 Questions
46 Questions
31 Questions
28 Questions
35 Questions