Rolex Watches - Recent Questions, Troubleshooting & Support

This f761720 rolex is 100% authentic. Went to rolex they confirmed this also.

The advice given here is accurate to a degree. When wound, a rolex daytona IS running. However, it is the running seconds hand in the small sub-dial that is actually running. In the earlier Daytonas, this sub-dial was at the 9 o'clock position on the dial, (pre-2001 series daytonas). The later daytonas, from 2001 on, use the seconds at 6 position for counting seconds. The main sweeping second hand on the watch dial will NOT start until activated by the pusher at the 2 position. That pusher needs to be unscrewed and then pushed to start the large sweeping second hand. This action, in turn, starts the remaining 2 sub-dials in motion, counting minutes and hours. To stop the chronograph function, you push the pusher @ the 2 position again, to stop the sub-dial hands from counting, and then push the pusher @ the 4 position to re-set the dials to their "straight up position". This stops the chrono's function, until it is needed again, BUT the main running seconds, (at either the 9 or 6 sub-dial position, depending on the year series of the daytona) will continue to run, thus keeping accurate time.  Hope this gives you a better idea of how the timekeeping of the chronograph function on a Daytona works. So, to start your seconds running you need to start the chrono function by pressing the pusher at the 2 position. That will allow you to see the large sweeping second hand I think you're referring to here. Hope this has helped.
Doug

At Ticker24, we take pride in making the most worthy and iconic timepieces accessible to all which is just as good as the authentic ones. Our passion and 15+ years of expertise in delivering luxury watches to our customers led us to this dream project of offering our collection of top-notch quality luxury replica watches. https://ticker24watches.com

This is the hint regardless of Rolex. Look at the second hand and watch the motion! Does it sweep or tick? If it ticks it is battery operated watch knockoff. Rolex is a self winding watch thus the second hand sweeps does not click each second.

You can, but putting in back on and not cross threaded is a lot more difficult, plus it has a sealing gasket that need replacing. If you want to play with a $10,000 watch, fine. :>) Hold the watch firmly, turn the ball to the left until it starts to unscrew. Keep going until you can grip the back of the watch with your fingers and turn it some more. Pull the back off.

How to Open a Rolex Watch: 10 Steps (with Pictures) - wikiHow

https://www.wikihow.com > ... > Jewelry > Watches

its fake Rolex Daytona's don't have any engraving on the back

Contact ROLEX has to be something they did. Mike

The simplest way to find out is to take it to a Rolex specialist repairer and ask them to look at it. They will know what small clues to look for to find out. Some of the clues could be inside the watch on the inside mechanism so a watch repairer will have the tools to open it correctly.

Fakes are getting better, but a jeweller removing the back will always tell the truth. There are some good videos in the link. https://www.google.com/search?q=rolex+daytona+fake+vs+original ..

Take your Rolex to your Local Rolex retailer for cleaning and adjustment.

Please don't get mad at me for sending you to a professional. I am 99% sure you can not fix this - just as I am 99% sure you will damage your Rolex if you try to fix it.

Thank you for your question @ FixYa.com

This link might help: https://www.google.com/search?q=HOW+TO+FIX+Rolex+electric+watch+not+working?&source=lmns&bih=568&biw=1366&hl=en&sa=X&ved=2ahUKEwi-y6HgsL_wAhXgBrcAHZ8lDvAQ_AUoAHoECAEQAA

Its not unheard of depending on the age of the watch (you say you purchased it 16 months ago but it could be a 15 year old watch.) If it was a new Rolex watch you have a 5 year warranty, so it should cost you nothing. If it was a pre-owned Rolex you should have received a warranty from your jeweler, most of those are 2 years. If this is a watch with value, and one you will either hand down or at some point resell then sending an older watch to Rolex is the proper direction - save all the repair documents, with the original receipt and the box. A Rolex Explorer II in good condition in US is about $5k, so $380 for a repair, though high, is worth it. I would recommend that if you do send it to Rolex for this repair and it is an older watch have it serviced too. The watch is returned to you in perfect condition with fill documentation. Lastly, you need not to send it to Rolex at all. Any good watchmaker/repair jeweler can do this for less than $380US.

https://www.youtube.com/watch?v=RzQcj1ulIkQ "Five hundred dollars for a '93 Rolex Daytona," he says, "I'll do it!" That same watch is valued at around $16,000-$19,000 now, depending on its condition.Jul 30, 2012 https://www.exquisitejewelersmiami.com/blogs/rolex-daytona-watches/6351872-the-rolex-daytona Rolex Daytona Size and WeightDaytona watches are large and typically measure 40mm across. Weight for the Rolex Daytona varies based on the material used. For instance, it ranges from 148 grams for the stainless steel model, to 195 grams for the white gold, to 283 grams for a platinum Rolex Daytona. https://northscottsdaleloan.com/watch-reviews/rolex-daytona/

There is no such thing as Rolex Quartz 59312. Ether you got yo numbers wrong or it is a fake watch.
Rolex made quartz watches only in men's size.
W-Precision

Doubtful. if you bought it cheaply. A jeweller will be able to tell. There are many authentic looking knockoffs. :-)

Take a look on amazon for real watch prices (Daytona): Amazon com Rolex Daytona . After that you can compare. I hope this was helpful. Cheers

My phone number,
00923222622273

winner rolex 24 ad daytona 1992 rolex geneve swiss made18k 750 price

Fake