Waring BB150 Work Top Blender "tight blades" Questions

...blender model number tsk-9368ap before I start blending I make sure the blade is locked in tight, while I am blending the blade comes loose and whatever is being blended starts coming out of ...

...blades don't move I took it apart,and screw it back very tight check to make sure the drive stud is spinning with the motor. If it is, make sure the blade assembly is lining up correctly as well as ...

...blades stop spinning. I wonder if there is something else wrong that caused the gear to get stripped in the first place. Any ideas at all I would really appreciate. I'm dying for a drink!! well it ...

...The multipurpose blade is to tight, and I'm not sure how to loosen the spring blades. You are lucky. they usually fall off mine. However you can gently ease them off with small needle nosed

...tight the base is screwed on. I wondered if it needs a new rubber gasket. Mine also leaked from day 1. I just read in the manual to first place the bottom and blade assembly on the counter, then seat ...

...tried slicing the food smaller and using smaller quanties still nothing. make sure blade is pressed tightly onto shaft... should click into indent. if not then you need a new blade piece.- stripped ...

...I added some water and noticed a constant drip. Help me!!! I thought the blade assembly was sealed tight and would withstand ice crushing. What can be done? I know this is an old, old post, but I ...

tight and will hardly turn. When I turn on the blender the motor strains to get it turning, and when it does it makes a horrible sound. I've stopped using it because I don't want to burn up the motor.

blades Thank you! The shaft has probably become tight in the bearings and the assembly will need to be dismantled for cleaning and possibly lubrication - I am unfamiliar with the Ninja but the average

...blades with a towel to protect your hand, then, use a visegrips needle nose to grab the coupling (pushing the guard down) and twist it loose. It may be very tight, when I loosened mine, the plastic ...