SOURCE: fork and engine oil for kawasaki kle 400 from 1993
Get the fork oil from the Kawasaki dealer and he will give you the right oil and tell you how much is needed. The gearbox oil is 10w40, any major brand is fine. I think your bike has a oil dipstick? If not then the oil capacity should be on the casing by the oil fill. Worst case, ask the dealer while you are there!
Best wishes and I hope this helps.
Please rate this solution. Thanks Robert!
SOURCE: front forks oil capacity kawasaki en 1500 1996
My book says "Capacity 368.5-373.5 cc dry. This is for a 1996 Vulcan 1500 A10. Should be the same.
SOURCE: Fork oil capacity for a 2005 kawasaki vn1600 mean
Hi Des, Im am Irish too, howya doin? The oil you want is SAE 10W-20. and 445ml if you are changing the oil. It can be more accurately checked with the fork removed and fully compressed and the spring removed, the oil will be 120mm from the top ot the stanchion.
The manual will give you more info on this and any other future problems so here is a link to it. Good luck to ya, and please rate me if I've helped you. Thanks
[email protected]
VN1600 manual...
http://www.scribd.com/doc/9607829/Kawasaki-VN1600-A1A2-Vulcan-03-Service-Manual-ENG-by-MosuenoPW
SOURCE: I need to know the fork oil capacity for a Kawasaki GPZ750
the oil is SAE10W20 and you must put 325 ccm if you change the oil, and if you let it all drain over night 380 ccm (plus or minus 4ccm). After that, mesure the level in each cilinder of the fork. In the left one, you must have 120mm (plus or minus 2mm) of air left in the cilinder, and in the right one, 149 mm (plus or minus 2mm) .
Hope this helps. Try getting a repair manual. You will find all the answers there.
Best regards, Gabyshor.
SOURCE: Fork capacity on 1991 KX 250
SILKOLENE PRO RSF 5WT or use
SILKOLENE FORK OIL LIGHT
500-MLS OIL EACH LEG
817 views
Usually answered in minutes!
×