When taking gas cap off give it a few seconds for the pressure to escape from the tank. Also you may not be putting the nozzle in far enough for the fume preventor(the rubber thing on the nozzle)to press down. That will make it stop pumping gas. Sometimes you have to press the rubber down when it is cold out.
691 views
Usually answered in minutes!
I had this problem two years ago and the only thing that helped was to replace the charcoal cannister. My mechanic removed the entire filler system and found not blockages or anything else wrong. It is doing it again and he took apart today to no result. He even put a camera in the entire system and found no problems. What could this be?
×