20 Most Recent
2004 Pontiac Grand Prix Questions & Answers
Take your car to a dealer and tell them to "clean the throttle body" Known problem for this year. It will solve your issue.
2004 Pontiac...
•
Answered
on Jan 28, 2021
Clean MAF sensor and Throttle Control body.
2004 Pontiac...
•
Answered
on Jan 12, 2021
temporary solution is to turn key to 'on' position and leave it for 10 minutes, this will reset the computer and the security light should go off...be ready for it to happen again at some random time in the future, though.
2004 Pontiac...
•
Answered
on Dec 26, 2019
Coolant Valve? Don't believe there is one.
2004 Pontiac...
•
Answered
on Jul 30, 2019
YES,
See
here for a description and picture of an adapter.
Good luck!
Brian
2004 Pontiac...
•
Answered
on Apr 08, 2019
Did try to back up a little? Put some WD40 in the ignition.
2004 Pontiac...
•
Answered
on Feb 14, 2019
You can locate and fix the problem with the help of service and repair manual with diagram on your own and you will get the manual from the given link
https://toolsnyou.com
2004 Pontiac...
•
Answered
on Jan 29, 2019
The best solution you'll get from books at
www.reliable-store.com
These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc
2004 Pontiac...
•
Answered
on Jun 18, 2018
MAKE SURE ALL YOUR CALIPERS SLIDES ARE FREE AND REAR SHOES IS NOT ADJUSTER TO TIGHT
2004 Pontiac...
•
Answered
on Jan 25, 2018
Yes , having the vehicle checked for DTC'S - diagnostic trouble code's should always be the first step in diagnostic process when any warning lamps are lit on the instrument cluster . Would be best to have someone with a professional type scanner , that can view engine sensor data . The engine coolant temp. sensor is a input to the PCM - engine computer . Can see what the actual temp. of the engine is . GM had bad stepper motors inside the instrument cluster's 2003 to 2006 , these stepper motors control the gauge needles . Testing what the real temp is an not going by temp gauge . harbor freight tools sells a tool under $30 bucks that can check engine temp .
Infrared Laser Thermometer .. Point it at the thermostat housing . Can use it to tell what temp. the thermostat open .
But , testing is the key ! Not guessing .
2004 Pontiac...
•
Answered
on Jan 15, 2018
I think you should go for manual first after that it will be easy for u to solve your problem. I had visited this site past 2 months before for my vehicle and find it quite helpful may be you will also get something useful here
Best Manuals
2004 Pontiac...
•
Answered
on Nov 17, 2017
What fluid were you told not to change? The automatic trans?
2004 Pontiac...
•
Answered
on Nov 09, 2017
You should bring the vehicle into a repair shop that does tranny FLUSHES not fluid drop only. A complete flush will change the fluid in the pan, lines and the torque converter. SOunds like you have water in the transmission and the longer you drive it that way the worse it will become.
2004 Pontiac...
•
Answered
on Oct 16, 2017
Not electrical. Your tranny does need professional help. I do not think that 2004 cars had electronic transmissions and solenoids for shifting.
2004 Pontiac...
•
Answered
on Sep 22, 2017
gas caps are either vented, or non vented. it sounds like you needed one type but bought the other...... Just a possibility
2004 Pontiac...
•
Answered
on Sep 21, 2017
Where are you coming up with this MI code from ?
2004 Pontiac...
•
Answered
on Sep 07, 2017
Which fuse ? Just to make sure you looked at the right one .
DISPLAYS fuse 10amp located in the I/P fuse block .
Do you know what DTC'S - diagnostic trouble codes are ?
DTC B3619
The HUD detects that the HUD change page switch signal circuit is low for greater than 15 seconds.
DTC B3634
The HUD detects that the HUD dimming signal circuit is low for greater than 15 seconds
Diagnostic System Check - Head Up Display
Install a scan tool.
Does the scan tool power up?
Go to Step 2
Go to Scan Tool Does Not Power Up in Data Link Communications
2
Turn ON the ignition, with the engine OFF.
Attempt to establish communication with the following control modules:
• Head Up Display (HUD)
• Instrument panel cluster (IPC)
• Powertrain control module (PCM)
• Driver information center (DIC)
• Radio
Does the scan tool communicate with the control modules listed above?
Your best bet , take it to a qualified GM service center .
2004 Pontiac...
•
Answered
on Sep 02, 2017
Possible have a caliber not retracting all the way and the brake shoe is slightly scrubbing the rotor. Don't overlook the possibility of wheel bearings or CV joints.
2004 Pontiac...
•
Answered
on Aug 03, 2017
Not finding what you are looking for?
