I want to know the torque spec for a wheel bearing on an Hyundai accent 2002

https://techtips.alleuro.com/wp-content/uploads/2020/10/SKF-Front-Rear-Axle-Nut-Hub-Mount-Lug-Nut-Torque-Spec.pdf

and

https://www.google.com/search?q=2015+%22hyundai+accent%22+rear+wheel+hub+torque+spec

..

Get this manual online at www.reliable-store.com and get complete guide on whether to repair or not, service it, and how to repair etc, along with wiring diagrams,
electrical diagrams, torque specs, error codes, everything.

torque hyundai accent Questions & Answers - Fixya

www.fixya.com > Forum > Tags

Torque specifications for cylinder head 2000 hyundai accent Are you aware that ... cover gasket on my 1997 Hyundai Accent GLS (engine code G4EH, 1.3L).

Hyundai Alpha engine - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Hyundai_Alpha_engine

WikipediaG4EH in a 1999 Hyundai Accent L ... lb·ft (132 N·m) at 4000 rpm, although some websites quote the torque rating as being 97 lb·ft (132 N·m) at 2700 rpm. ... 1992 Hyundai S-Coup? LS specifications - Carfolio.com · 1992 Hyundai S-Coup? GT ...

[PDF]AERA Torque Specs

www.aera.org/uploads/4/3/7/7/43776611/aera-torquespecs.pdf
AERA Torque Specs. 500 Coventry Lane, Suite 180, Crystal Lake, IL 60014. Toll-free Technical Hotline: 1-888-324-2372 (1-88-TECH-AERA). 815-526-7600 fax ...

.

Torque Specifications - AutoZone

www.autozone.com/.../Hyundai.../Specifications/Torque-Speci...

AutoZoneTorque Specifications. Print. Specific to: Hyundai ... Specific to: Hyundai Accent2006. Hyundai Azera 2006. Hyundai Elantra 2006. Hyundai Sonata 2006.

Club Accent Qu?bec • Consulter le sujet - hyundai motor s

www.wow.com/Hyundai+Torque+Specs

maybe here.

torque of what?
there are cam bearing caps
and cog gear bolts, and more.
try to be exact.

alldata.com has it. long in and look

Front wheel bearing hub is 147 ft lbs. Axle nut is 170 ft lbs.

Axle may not be engaged in output splines. Axle should click when spring clip reaches indent. Jack wheel with car in park and see if wheel will turn. If yes, axle is not fully installed. Let me know if you have more questions.

Torque in two to three stages.
Connecting rods are 24-26 lb.ft.
Main bearing caps are 41-44 lb.ft.
Hope this helps,Chuck

Wheel bearing don't have torque specs (to the best of my knowedge). They have a procedure - in this case it is....
1. With everything clean and packed with grease, snug the bearing lock nut until it stops.
2. Reverse it about 1/8th to 1/4 turn and insert the cotter pin.
Done

Their shop website says below but you can call the service department. usually you want to tighten it just until it starts to not rotate freely then back off just a little bit. It should spin freely.

Hub bearing starting torque [Limit] : 1.8 Nm (18 kgf·cm, 1.33 lbf·ft) or less