How do you program stations on a factory 95 mercedes e320 AM/FM radio?

If you pick up FM. It isn't the antenna. It's an internal radio problem.

The NEW Radio will come with its own Code.

Are you talking about Moving the FACTORY RADIO into a different car?

Are you talking about the CAR is asking for the Code?

If you call Mercedes with the RADIO MODEL and SERIAL NUMBER. They can give you the Code (Sometimes)....

This is where the 10 year RULE comes into Play

Best advice is to buy an aftermarket radio. The cost to repair the factory radio will be double or triple what you will spend to buy a nice Sony, Kenwood, JVC or Pioneer radio with the latest technology. Been there, done that.

1. Connect the FM antenna and the AM loopantenna at the back of the unit. Rotate the AM loop for better reception.
2. Press AM/FM.
3. Tune a station by pressing TUNER+/-repeatedly until the desired station is found.Alternatively, you can press and hold thesame buttons down for about one second toactivate the automatic search function. Inthis mode the unit will automatically tunefrequencies until it finds a station.
4. Repeat step 3 to tune to another radio station.
5. Press AM/FMto select between FM and AM.Storing Radio Stations

The unit can store up to 40 radio stations (30 preset stations for FM and 10 preset stations for AM) in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in ascending order

Automatic Preset Programming
1. Press AM/FM to enter the AM/FM mode.
2. Press and hold AM/FM for two seconds to start automatic preset programming.
3. Radio frequencies will be browsed and radiostations stored automatically. When all the available radio stations are stored or all 40(30 preset stations for FM and 10 preset stations for AM) memory locations are full,the auto preset programming function will stop.

Manual Preset
1. Tune to a radio station (see "Manual tuning"for details).
2. Press MEMORY. While the Program Preset number is still flashing, input your desired preset number using the numeric buttons or press CH+/-, then press MEMORY to store it.

Retrieving Preset Stations
1. Press AM/FM to enter the Tuner mode.
2. Press CH +/- to search up or down for thepreset stations or directly press the numeric buttons.

DOES THE READOUT PANEL ON THE RADIO SAY CODE.

Its inside your car manual on the left side as you open it up, it'll be a lil grey card that will have the radio code written on it... read the manual and it'll tell you how to put the numbers in.

the radio should pull right out. use 2 picks to grab the sides and pull gently.

got the code but it's not workin

depends on the year. Pre 90's are a little different from post 90's.

you must got to the dealer for a radio code for you benz. sorry