At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
yor car has got the troublesome jatco gearbox. you need to get someone with a code reader to get the fault codes out of the tcm {transmission control module} may be just low fluid level or selector cable jgate problem but more than likely the box has failed and needs replaced/repaired
It shows that your fault management system has been recently reset. It will not bring on the engine management light. For more info on fault codes goto http://www.bluejag.co.uk/
1. check electric fan comes on.( this is done by bridging the wires coming from the switch on the rad
2. replace themostat could be intermitant sticking, i am not sure but there may be 2 one in the engine and one in the water pump, depends on the engine set up
Code PO430 could be = catalyst efficiency below threshold bank 2 ........ this may be caused by faults in combustion and if you have just completed repairs it may rectify itself as the car runs correctly ...... do not leave as a fault for too long as damage will occur to cat/conv.
×