Where is 02 bank 2 sensor 1 placement on a 2001 nissan sentra

standing in front of the vehicle looking at the engine bank 1 sensor 2 is the sensor after the cat converter on the bank on your left
bank one is the left cat ---bank 2 is the right cat. Sensor 1 is the one before the cat and sensor 2 is the one after the cat on either side

Here's your firing order cylinder one is bank one,sensor two is at the catalaytic convertor on that side,which is the passenger side,the oxygen sensor.

COULD BE OXYGEN SENSOR.Trouble Code: P0141

HO2S-12 (Bank 1 Sensor 2) Heater Circuit Malfunction

Possible Causes:


HO2S heater control circuit is open or shorted to ground.HO2S heater control circuit is shorted to power.HO2S heater is damaged or has failed.PCM has failed.

Unless I am missing something the 2001 nissan sentra has two four cylinder engine options.

The bank refers to which side of the engine. a four cylinder only has one bank so there can only be a bank 1. A v-6 or v-8 will have two banks since there is a bank of cylinders on each side of the engine. So there will be a bank 1 which is always the same side of the engine as the number one cylinder, and a bank 2 which is always the other side of the engine.

Sensor refers to upstream or downstream of the catalytic converter. Sensor one is upstream or before the cat. Sensor 2 is downstream or after the cat.

If you entered the wrong year or wrong vehicle or if you can post the actual code I will see if I can help you further.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

P0804 is the highest OBD-II trouble code.

Here's your Oxygen sensor codes.

P0130 02 Sensor Circuit Malfunction (Bank I Sensor 1)
P0131 02 Sensor Circuit Low Voltage (Bank I Sensor I)
P0132 02 Sensor Circuit High Voltage (Bank I Sensor 1)
P0133 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)
P0134 02 Sensor Circuit No Activity Detected (Bank I Sensor 1)
P0135 02 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)
P0136 02 Sensor Circuit Malfunction (Bank I Sensor 2)
P0137 02 Sensor Circuit Low Voltage (Bank I Sensor 2)
P0138 02 Sensor Circuit High Voltage (Bank I Sensor 2)
P0139 02 Sensor Circuit Slow Response (Bank 1 Sensor 2)
P0140 02 Sensor Circuit No Activity Detected (Bank 1 Sensor 2)
P0141 02 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
P0142 02 Sensor Circuit Malfunction (Bank I Sensor 3)
P0143 02 Sensor Circuit Low Voltage (Bank I Sensor 3)
P0144 02 Sensor Circuit High Voltage (Bank I Sensor 3)
P0145 02 Sensor Circuit Slow Response (Bank 1 Sensor 3)
P0146 02 Sensor Circuit No Activity Detected (Bank I Sensor 3)
P0147 02 Sensor Heater Circuit Malfunction (Bank I Sensor 3)
P0150 02 Sensor Circuit Malfunction (Bank 2 Sensor I)
P0151 02 Sensor Circuit Low Voltage (Bank 2 Sensor I)
P0152 02 Sensor Circuit High Voltage (Bank 2 Sensor 1)
P0153 02 Sensor Circuit Slow Response (Bank 2 Sensor 1)
P0154 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 1)
P0155 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)
P0156 02 Sensor Circuit Malfunction (Bank 2 Sensor 2)
P0157 02 Sensor Circuit Low Voltage (Bank 2 Sensor 2)
P0158 02 Sensor Circuit High Voltage (Bank 2 Sensor 2)
P0159 02 Sensor Circuit Slow Response (Bank 2 Sensor 2)
P0160 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 2)
P0161 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 2)
P0162 02 Sensor Circuit Malfunction (Bank 2 Sensor 3)
P0163 02 Sensor Circuit Low Voltage (Bank 2 Sensor 3)
P0164 02 Sensor Circuit High Voltage (Bank 2 Sensor 3)
P0165 02 Sensor Circuit Slow Response (Bank 2 Sensor 3)
P0166 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 3)
P0167 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 3)

Note: "Bank 1" is the side of the engine with cylinder 1. "Bank 2" is the other side.

Bank 1 sensor 2 is the O2 sensor behind the catalytic converter.

code P1128 02 sensor bank 1 lean
code P1129 02 sensor bank 1 lean to limit
code P1133 02 sensor bank 2 lean
code P1134 02 sensor bank 2 lean to limit

fuel system is lean.

All O2 Sensors are on the exhaust pipes and or in the converters,on all vehicles. Follow the wires.

it is wher the engine meets the transmission..on the flywheel...and the oxygen sensors bank 1 is the one before the catalyst....and bank 2 is the one after the catalyst....

if your getting 02 sensor code most likely the problem is not the 02 sensor you must check what code your getting if your getting a lean that could be anything else like air filter, air flow meter remember on your vehicle has 4 02 sensors I need to know what code is giving you so I can give you more advice.