99 JEEP BRAKE LIGHTS WONT WORK..THIRD BRAKE LIGHT WORKS..FLASHERS WORK..TURNSIGNALS WORK, EVERYTHING ELSE WORKS...WHATS SHOULD I DO??? PLEASE HELP!!!
Have you replaced the bulbs yet even if both lights are out try this first hope this help
On chrysler products the third brake light is run independant of the body control module, try checking the fuses that run the brake lights and see if any are faulty if not check you have voltage at the switch and a signal getting to the lights.
893 views
Usually answered in minutes!
I fixed the problem!!! atthe read of the jeep pull down the wheelwell splash guard...then u will find connecter wires with plugs on them.....open the plugs and spray wd-40 in them, connect them back up and your problem is fixed!! took me 3 hours of messin around b4 i tried this...hope it helps all you jeep lovers!!! rob
×