Factory repair manual 93 q 45
SOURCE: 1993 buick le sabre no spark problem
you should be hable to get some free repair tips at autozone.com, or buy it, but i will recomend you to replace the crankshaft sensor, because the crank sensor and the ignition module is what trigers the coils, i hope and i been help full and i will apreciate the ranking to me.
SOURCE: 1997 Jeep Grand Cherokee Factory amplifier
I have the file on my other computer - search other bulletin boards. Check with Crutchfield help desk.
Input wires are the speaker wires from the Amp head/receiver (so you can go to a BestBuy and ask them for the speaker wire colors). Black is ground. Yellow/black is main power. Blue/white is turn on wire. If in doubt take off the door panels and look at what color wires go to the speakers.
SOURCE: INFINITY G35 FUSE DIAGRAM
there is an ipd/m fuse box behind the battery of my 2004 infiniti g35 sedan. I blew a fuse and couldn't find it. So remove the plastic panel that is right next to the windshield washers when the hood is open. You'll see an entirely new fuse box. So all in all, there are three fuse boxes... one by your feet on the driver's side, one in front of the battery, and one behind the battery. hope it helps
SOURCE: Please help me i need the Lighting Control Module diagram
http://i28.photobucket.com/albums/c216/thomaspedemon/99lcm1of3.gif
http://i28.photobucket.com/albums/c216/thomaspedemon/99lcm2of3.gif
http://i28.photobucket.com/albums/c216/thomaspedemon/99lcm3of3.gif
follow the three links for complete wiring diagram of lcm
SOURCE: need a wiring diagram for abs traction control
hope you can see this
Testimonial: "It needs to be enlarged on the original in order to read the diagram."
?€¢
The IPC detects a loss of serial data communication with the EBCM
Traction Control System (TCS)
When drive wheel slip is noted while the brake is not applied, the EBCM will enter traction control mode.
The EBCM uses a 5-volt pulse-width modulated (PWM) signal to request the PCM to reduce the amount of torque to the drive wheels. The PCM reduces torque to the drive wheels by retarding spark timing and by commanding the throttle actuator control. The PCM uses a 5-volt PWM signal in order to report to the EBCM the amount of torque delivered to the drive wheels.
You would need a factory grade scan tool to check data PID's - parameter identification , all the sensors work within a specific voltage range 1- 5 volts an you can see this on a good scan tool !
The Traction control is part of the ABS system an there a several DTC possible
DTC B0827 DTC B0828 DTC B2745 DTC C0035 DTC C0035 or C0040 DTC C0040 DTC C0055 DTC C0110 DTC C0191 DTC C0201 DTC C0220-C0229 DTC C0240 or P0856 DTC C0244 or P1689 DTC C0245 DTC C0267 or C0268 and C067 or C068 DTC C0550 DTC C0899 DTC C0900
You best bet is to take it to a qualified repair shop !
You
54 views
Usually answered in minutes!
×