Removing the shift knob on a 2002 thunderbird

SOURCE: shifter knob removal

the shift knob is glued and pressed on, the best way to remove it intact is to heat the knob with a heat gun and pull straight up with a lot of force, please be very careful because when the knob finally releases there is very good chance that you can hit yourself in the face, if the knob is not to be used again you cut a **** up the side with a dremal tool,

SOURCE: 1997 thunderbird lx center console removal

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528006bf3a

SOURCE: fuel pump removal?? drop the tank?????

See if access can be through trunk..I"ve cut a square hole above pump in trunk floor on other makes works fine..I've got electric sheet metal shears,,looks like drill..but CAREFULLY use air chisel too

SOURCE: problems with transmission

Sounds like bad motor mounts or transmission mount.

SOURCE: 2003 ford thunderbird how do you remove inner door panel?

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door