What is the 15 amp fuse function located & connected right on top of my battery on a volvo v70 1999 2.5 turbo

FUSE PANEL LOCATION
The fuse panel is located in the engine compartment. A label on the inside of the cover lists the fuse amperage and circuits protected.
volvo 850 fuses fuse panel layout service repair manual
FUSE PANEL IDENTIFICATION
Fig. 1: Fuse Panel Identification
Courtesy of Volvo Cars of North America.
WARNING: Always disconnect battery ground cable before servicing "high-current fuses. It is recommended that "high-current" fuses be replaced by a qualified technician.
* 1 - 15 Amp
Fuel Injection, Distributor Ignition, Automatic Gearbox
* 2 - 15 Amp
Fuel Pump, Alarm System
* 3 - 10 Amp
Courtesy Lights, Oil Level Sensor
* 4 - Not Used (1993-95)
* 4 - 10 Amp (1996)
Electronic Start Inhibitor (Immobilizer)
* 5 - 30 Amp
ECC Blower (Speed 4)
* 6 - 25 Amp
Central Locking System, Alarm
* 7 - 15 Amp
Audio System (Amplifier)
* 8 - 25 Amp (1993-95)
Power Antenna, Trailer Connector
* 8 - 40 Amp (1996)
Electronic Start Inhibitor (Immobilizer)
* 9 - 30 Amp
ABS, Traction Control System
* 10 - Not Used (1993-95)
* 10 - 15 Amp (1996)
Heated Rear Seat (If Equipped)
* 11 - 30 Amp
Heated Rear Window & Side Mirrors
* 12 - 10 Amp
Brake Lights
* 13 - 15 Amp
Hazard Flashers, Headlight Flashers, Alarm
* 14 - 30 Amp
ABS, Traction Control System
* 15 - 10 Amp (1993-95)
Audio System, Courtesy Lights, Door Open Light, Trunk Light, Glove Box Light, Remote Control Central Locking System,
Oil Level Sensor, Seat Belt Reminder
* 15 - 10 Amp (1996)
Audio System, Courtesy Lights, Door Open Light, Trunk Light, Glove Box Light, Remote Control Central Locking System,
Oil Level Sensor, Seat Belt Reminder, Data Link Connector
* 16 - 30 Amp (1993-95) Accessories
* 16 - 30 Amp (1996)
Power Antenna, Trailer Connector, Accessories
* 17 - 10 Amp
Key Reminder
* 18 - 25 Amp (1993-95)
Heated Front Seats, Power Mirrors
* 18 - 15 Amp (1996) Front Fog Lamps
* 19 - 15 Amp
Left High Beam Headlight
* 20 - 15 Amp
Right High Beam Headlight, High Beam Indicator
* 21 - 15 Amp
Left Low Beam Headlight
* 22 - 15 Amp
Right Low Beam Headlight
* 23 - 10 Amp
Left Parking Light, License Light
* 24 - 10 Amp
Right Parking Light, Bulb Failure Warning Sensor
* 25 - 10 Amp
Rear Fog Lamps, Fog Lamp Indicator
* 26 - Not Used (1993-95)
* 26 - 25 Amp (1996)
Heated Front Seats, Power Mirrors
* 27 - 15 Amp
Back-Up Lights, Turn Signals
* 28 - 10 Amp
Cruise Control, Heated Rear Window, Seat Belt Reminder Light, Shiftlock, Bulb Failure Warning Sensor, Heated Rear Seat
* 29 - 15 Amp
ABS, Traction Control System
* 30 - 10 Amp
Cigarette Lighter
* 31 - 25 Amp
ECC, ECC Blower (Speeds 1-3)
* 32 - 10 Amp
Audio System, Remote Controlled Central Locking System
* 33 - 15 Amp (1993-95)
Power Seats, OBD Test Socket, Tailgate Washer/Wipe (Wagon)
* 33 - 15 Amp (1996)
Power Seats, Tailgate Washer/Wipe (Wagon)
* 34 - 25 Amp
Windshield Wiper/Washer, Horn, Headlight Washer/Wiper
* 35 - 10 Amp
Instrument Lights, Sun Roof, Traction Control System
* 36 - Not Used
* 37 - Circuit Breaker
Power Windows, Power Sun Roof
* 38 - Not Used
* 39 - Circuit Breaker
Drivers Power Seat
* 40 - Circuit Breaker
Passengers Power Seat
RELAY PANEL LOCATION
The relay panel is located at the left corner of the instrument panel.
i copied this off a volvo site Hope this helps

It's marked LP PK R 15 amp , it's located in the instrument panel fuse box . IP Fuse Block
Under the right side of the IP, near the rear of the IP compartment

LP PK R Fuse 15
15 A
Remote Function Actuator (RFA) Module, License Lamps, Tail/Stop Lamps, Tail/Signal Lamps, RH Side Marker Lamps, RH Front Park/Turn Signal Lamp

hi

the first internal fuse box on a Australian 380 Mitsubishi is located on the drivers right side end of the dash.


open the drivers side door and on the right end of the dash, you will see a panel that sits flush on the end of the dash.


pry the panel open with your fingers or a tool, it opens up to the right, there are relays and fuses in there for the cars different functions.


the 2nd fuse box is located under the hood/bonnet on the Australian 380 model.


if you are in front of the car looking at the windscreen it is located on the right side in a black box near the suspension tower.


the top pops off and relays and fuses are in there.


both fuses boxes have the wiring diagrams under the lids so you can identify which fuse operates which function


to match the fuses to the diagram, start from one end first and check the amps for that fuse then the next one in the same row and then the next one.


after that you should be able match the fuses to the diagram, if the fuses dont match the diagram from that end, then start at the other end and do the same thing.


i hope this helps


cheers

Hi em1cl, I suggest you check fuse #D3, 15A in the fuse block located in the trunk.

It looks easy for the 940 but I am not sure about the 940 turbo, as maybe some of the turbo parts are in the way. I'm not sure about that, since there is no documentation on the turbo model vs. the 940 standard model. If you can follow the following instructions, then I would give it a whirl.

REMOVAL & INSTALLATION - 1993 Volvo 940

1. Disconnect the negative battery cable at the battery.
2. Disconnect the leads from the starter motor.
3. Remove the starter motor retaining bolts.
4. Remove the starter motor from the vehicle. To install:
   
5. Position the starter motor to the flywheel housing.
6. Apply locking compound to the bolt threads and install the retaining bolts finger-tight.
7. Tighten the bolts to approximately 25 ft. lbs. (34 Nm).
8. Connect the starter motor leads and the negative battery cable. Fig. 1: Unfasten the nut retaining the starter cables . . .
   Fig. 2: . . . and remove the starter cables
   Fig. 3: Unfasten the starter retaining bolts . . .
   Fig. 4: . . . and remove the starter from the engine
   

the BOO switch, (Brake On Off) located on or near the brake pedal

Hi!!

Thermostat location in 5 cil. engines, temp sensor is located just right or upper arrow in picture. I've included a picture of temp sensor and installation instruccions.



Never open, service or drain the radiator or cooling system when hot; serious burns can occur from the steam and hot coolant. Also, when draining engine coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze and could drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantities. Always drain coolant into a sealable container. Coolant should be reused unless it is contaminated or is several years old.

1. Drain the engine coolant.
2. Disconnect the ground cable of battery.
3. Remove the electrical connector from the sensor.
4. Remove the coolant temperature sensor.
   
   Fig. Coolant temperature sensor illustrated
   Coolant temperature sensor illustrated

To install:

1. Apply sealant to sensor threads. Install the sensor and tighten to 15-29 ft. lbs. (20-39 Nm).
2. Attach electrical connector to sensor.
3. Connect the ground cable of battery.
4. Refill the coolant.

If helpful, click below, good luck.

check under drivers dash. and right and left sides of dash with doors open. may not be a flosher but a relay instyead

Sometimes the fuse looks good,but replace it anyway,that sensor in under your dash,its red and round.