Just unbolt it from underneath and under the hood.
SOURCE: Remove rear plastic bumper cover
please email me at [email protected] with any other info or questions if you have already gone to a body shop
SOURCE: how do I remove the back bumper (plastic) on a 2003 toyota camry?
you can heat the bumper heat gun ( you can rent one i think?)
this will soft the bumper so you push it out easily on the car
1. inside your trunk remove small back clips in trim panel
2. remove tail lamp four 8mm nut perside unplug wires
3. remove black clips under tail lamps ( flat head screwdriver to pull center of the clip up slowly then remove the hole clip)
4. three if the some clips are bottom if the bumper
5. three or four 10mm nuts in side the quarter panel on the right and left side
6.four s shape clips are top bumper that will pull loose
7. with some help slide bumper by pulling it off it
8. when you reinstall the bumper you may need to tape the strophe reinforcement in place
SOURCE: front grill on toyota solara
That is correct - it worked for me - now the questions is - How do I remove the old logo ?
SOURCE: toyota yaris front bumper removal
it will scare u when u find out how easy it is clips on bottom one clipe on each fener in frount of wheel under hood u will see where it is clipted on may need a # 10 socket and a small scerwdriver
128 views
Usually answered in minutes!
×