SOURCE: i cant get to the top bell housing bolts
The top bolt at the ten o'clock position is the hardest bolt to get out. You may have to unbolt the driver side engine mount and twist the engine to the side to get to it. Keep the engine supported when you disconnect the mount. I have a haynes manual for that model and it recommends this method. Or if you have a hundred or so dollars to kick around you can order a 1 inch body lift and install it so you will have more clearance. If you have a good enough jack, you can unbolt the body mounts on the front and jack up the body an inch or so to give you the clearance as well. Good luck.
SOURCE: how do you remove the alternator on a Chevy trail
Using a ratcheting box end wrench works for me and many other TB and Envoy owners. Difficult little bugger with those lines in the way. Use the same method for the bottom bolt of the thermostat, same problem, IF that's what you're trying to get to.
Testimonial: "Thanks for your help"
SOURCE: Are the brakes on an '03, Chevy Blazer disc our
the front have disc, brakes. as well as the rear. 2 and 4 wheel drive have disc, brakes front and rear. good-day !
SOURCE: 89 chevy blazer spout connector located
Only Ford products used a spout connector during the 1980s and 1990s.
77 views
Usually answered in minutes!
×