Cars & Trucks Logo
K
Kim McCauley Posted on Jan 29, 2015

I have a 2004 Mitsubishi Lancer. My passenger tail lights are out. I have changed the bulbs and they are still not working. I do have brake lights. Any suggestions

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

The tail light isn't working on one side. Break lights are! But now the two in the center won't come on either. What can I do ? And where do I find

Be careful that you have the right type of bulb in the socket some of them were supposed to be 2 elements inside of them and some of them are meant to have only one element typically to be sure a light socket that has more than two wires going into it will be a double element bulb. As long as the existing wiring has not been modified by somebody or is broken or shorted together then this is the only problem I I think you may be having
0helpful
1answer

Both brake lights are not working. how do i know which fuse to change

check the bulbs if still good replace the brack light switch,which is located under dash on brake pedal
0helpful
1answer

Tail light is dimly lit when lights are on

check the grounding. sounds like a short.
2helpful
2answers

How do I change the passenger tail light bulb on my 2006 mitsubishi galant?

  • For the tail light you first need to remove the brake light that is part of that assembly.
  • Open the trunk.
  • Inside of the trunk is some matting you need to pull down a bit.
  • You may need to remove a net first.
  • Once you pull the matting/carpet down you will see some plastic wing nuts around the are of the brake/tail light.
  • Remove them.
  • Now wiggle the brake light out
  • Now wiggle the tail light out.
  • Twist the socket to the bulb that is bad out.
  • The bulb just pulls strait out.
  • Revers to complete.


  • Thank you for using FixYa.

Regards, Tony
0helpful
2answers
0helpful
1answer

I drive a 2004 Lancer Raliart. While braking my right turn signal light slightly illuminates. Also, the turn signal blinks rapidly when brakes are applied.

If right side bulbs are replaced and working and problem persists,,,, Beat on horn violently and vigorously while turning steering wheel to variouse positions
1helpful
1answer

How to replace rear brake light bulb in mitsubishi lancer'04

Open the trunk and inside you should see the rear plastic panel
of lancer's tail lights.Undo the screws using screw driver and
gently pull the assembly off.You should see 3 light bulbs.
Replace whichever is busted.
1helpful
1answer

2006 Ford Ranger. Rear passenger side tail light

Bad earth connection.Clean or replce wire.
5helpful
2answers

Mazda 3 tail light on, brake light not on

The bulb actually has two seperate elements in it.
That is why the tail light works fine.

If you take the bulb out you will see the seperate elements.
Change the bulb and it should be fine.
0helpful
1answer

Tail Light

sounds like your bulb socket is bad. you can buy them in any auto shops. mine did that and i replaced it and it was fine. I would look at the one that is not working and compare the size and try it.
Not finding what you are looking for?

288 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...