2007 Chevrolet Uplander LS Minivan Logo
A
Anonymous Posted on Oct 21, 2014

Looking for wiring diagram for 2008 chev uplander

Signal lights

1 Answer

Redx

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 7 Answers
  • Posted on Nov 27, 2014
Redx
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Nov 27, 2014
Answers
7
Questions
0
Helped
3283
Points
16

Search google or bing for specific section of vehicle, buy auto manual, get electronic manual on ebay

5 Related Answers

Bill Hackett

  • 383 Answers
  • Posted on Apr 20, 2009

SOURCE: were is the fuse panel located on a 2008 chev uplander?

thebassman: You have two fuse blocks. One is located in the engine compartment on the right hand inner fender. It is a large plastic box with a black cover. When you remove it you will see relays and fuses.
The other fuse block is on the right hand side of the car. When you open the front door, look at the side of the dash and you will see a cover which you can pull off. It will expose the fuse block.
I hope my answer is sufficient. Let me know if I was helpful by answering FIXYA's question.

Ad

Anonymous

  • 1 Answer
  • Posted on May 31, 2010

SOURCE: Need to replace fog light on 2006 Chev. Uplander

replace turn signal light

Anonymous

  • 2418 Answers
  • Posted on Feb 20, 2011

SOURCE: looking for a wire

In this car you will need an stereo adapter. Some functions of the cars warning system are in the radio. You use this adapter to replace the factory radio. The adapter facilitates replacement of a factory radio while retaining all factory safety warning chimes and audible turn signal indicators. These adapters are compatible with amplified and non-amplified audio systems. Will retain all safety warning chimes. See this web site for more info. Autosound Central. With the right adapter you do not need a wiring diagram. It will be plug and play.

wyet_helps

wyet

  • 510 Answers
  • Posted on Jun 05, 2011

SOURCE: "!" Indicator light on 2008 Chev Trailblazer

If the ! symbol you saw is inside a circle enclosed in parentheses like (O), and usually red in color, that's for your brake fluid. Check it out, maybe its low on fluid. If it is, check for fluid leaks or worn brakepads. Usually the ! symbol coincides with the P symbol and also red in color. When the park brake is engaged, both these symbols appear together. If you release the park brake, both indicators should turn off under normal conditions, otherwise either of the two or both will stay on when there is insufficient fluid or there's a parking brake circuit fault. Brakes are very important, so give proper attention and solution if ever these indicators lightb up when they shoud not.
If the ! symbol is very bold and inside a half drawn flat tire, and yellow in color, thats the tire pressure monitor indicator. Check and balance all four tire pressures to the correct specification.
Okay, sir? have a safe trip. : )

Anonymous

  • 81 Answers
  • Posted on Sep 09, 2011

SOURCE: My keyless remote for my 05 Chev uplander won't

best thing to do would to take it to either the dealer or a car audio place that deals with alarms

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a 2006 Chevy Uplander and I'm trying to connect a reverse backup camera to my car and I do not know which wire is positive for the reverse light bulb

open up the rear bulb compartment cover
and note the color wires running into the reverse light bulb holder

a hand full of fuses as you
use a LED test light or voltmeter to find the right wire

and use those color wires as your power /earth for the reverse camera

or you need the rear loom wiring diagram for that 2006 chev
0helpful
1answer

Does bcm in 2008 Chev uplander regulate signal light and power

THE I/P FUSE PANEL THE FUSE IS THE STOP/TURN FUSE 12
20 AMPS
0helpful
1answer

Need wiring diagram for chev uplander 2008 signal lights and hazards

Diagrams are generally available from dealer parts department free. I also often try a google search and get what I want.
1helpful
1answer

2006 chev uplander lights blink at night

replace the head light switch, check the plug in at the switch they have a bad problem with the wiring getting hot at the plug in , chevy makes a repair kit to replace the plug with a new style....good luck
1helpful
1answer

Im looking for a wiring diagram for 66 chev

the wire you are looking for comes out of the turnsignal switch,but also ck the bulb socket housing connectors,but most likley the turn signal switch has problem,does your cancel work??sometimes the cancel spring breaks and fall down into wire connections and causes these kind of problems,,,goodluck
0helpful
1answer
0helpful
2answers

What colour wire is the stoplight feed that feeds the stop lights

I'm assuming you have a trailer towing package.
Below is the wiring diagram. It appears the dark blue is your stop lamp wire you may be looking for.
Let me know if anything is different.
Regards,
moz-screenshot-6.jpg

0900c1528024882e.gif

Not finding what you are looking for?

394 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...