2008
SOURCE: Chev Cavalier 2003 only one rear turn/brake/hazard light
I have a 2002 Chev Cavalier that had the same exact problem. I replaced the bulb harness (purchased from a chevy dealership for around $5) which was fairly easy to do. I have had zero problems with it since.
SOURCE: were is the fuse panel located on a 2008 chev uplander?
thebassman: You have two fuse blocks. One is located in the engine compartment on the right hand inner fender. It is a large plastic box with a black cover. When you remove it you will see relays and fuses.
The other fuse block is on the right hand side of the car. When you open the front door, look at the side of the dash and you will see a cover which you can pull off. It will expose the fuse block.
I hope my answer is sufficient. Let me know if I was helpful by answering FIXYA's question.
SOURCE: im looking for a wiring diagram for 66 chev
the wire you are looking for comes out of the turnsignal switch,but also ck the bulb socket housing connectors,but most likley the turn signal switch has problem,does your cancel work??sometimes the cancel spring breaks and fall down into wire connections and causes these kind of problems,,,goodluck
SOURCE: 2008 uplander has no turn signals ,hazard lights
DID YOU CHECK FUSES? DID IT START ALL OF A SUDDEN? IS IT ON BOTH SIDES?
802 views
Usually answered in minutes!
×