How do you find timing marks on1998 mercury villager 3.0

SOURCE: 96 Mercury Villager front blower control only works on high

check blower motor resistor

Ned White

• 2100 Answers
• Posted on Apr 01, 2010

SOURCE: putting on timing belt .

The crank has got to be at TDC, with the marks lined up, the cams have to be lined up to their marks, then the belt will line up, If it doesn't line up, You will be walking home. If you have the old belt handy and the marks are still visible, compare them to the new belt, make sure they are the same. Pull the pin on the belt tensioner and you should be all set. Hope this helps.

SOURCE: aligning timing marks on 2002 mercury villager

Click on the following free, direct Link. It has all the Timing Belt Diagrams you will need, complete with Instructional and Directional Diagrams to set your Timing.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2002/make/mercury/model/villager/2002_mercury_villager_timing_belt_diagram_marks.htm

SOURCE: replaced timing belt on 1997 mercury villager. it

The timing marks are generally tiny arrow located on the gears which hold the timing belt. Make sure the arrows are pointing up and you should be close enough to get the vehicle started and to a garage for minor adjusting with a timing light. Unless of course you have one of those timing lights.

SOURCE: timing marks for cam and

go here

http://groups.yahoo.com/group/villagerquest/