At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Thank you chuck943, cleaning the grounds and the connector worked just like you said it would, you saved me alot of time and aggrevation.Thank you chuck943, cleaning the grounds and the connector worked just like you said it would, you saved me alot of time and aggrevation.
You can't post conmments that contain an email address.
Re: 92 lincoln continental 3.8 wont start and the relay...
Look at the battery neg. cable you will see 2 smaller black wires going from it to a grey connector. This connector is corrioded. Take it apart and try and clean it or just cut it out and bypass it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is no external turn signal flasher on a 2001 Town Car. The flasher unit is an internal part of the Lighting Control Module (LCM) and can not be serviced seperately. The LCM is located under the dash to the right of the steering column. It may also be referred to as the MECM (Mutli-Function Electroninc Control Module).
Doesn't have a relay for the fuel pump . Uses Fuel pump driver module (electronic control module ) Electronic returnless fuel system .
Viewing a wiring diagram would show this . Free wiring diagrams here http://www.bbbind.com/free-tsb Enter vehicle info year , make , model etc... under system click on engine , then under subsystem click on fuel controls . Click the search button , then the blue link . Scroll down to diagram #11 .
Watch this video . Ford Electronic Returnless Fuel System Diagnosis Part 1 Ford
The TCM is integrated into the PCM module. . The PCM/ECM is under hood on the firewall around the master cylinder, there should be two to three bolts that need removal to come out on front side of fire wall. Disconnect the battery negative cable before any work is done.
both answers are correct for the "DLC", I believe the DCL is a function or error message indicating a communication problem with the Dashboard module and the PCM module. The DLC is located where "tedpineywood" said it is.
have you checked out the core packs? and if you go to autozone you can get a printed diagram where the crankcase sensor is located also look for the location normally under the hood for the fuel pump relay
Thank you chuck943, cleaning the grounds and the connector worked just like you said it would, you saved me alot of time and aggrevation.
×