20 Most Recent 2001 Lincoln Continental Questions & Answers

I would say it has something to do with this ! Shift Interlock System An ignition/shifter interlock mechanism is installed to prevent shifting the transaxle out of the PARK position unless the ignition switch is rotated to RUN and the brake pedal is applied. The floor shift interlock system consists of:
  • an actuator assembly integral to the ignition/shifter interlock cable assembly.
  • a bracket retaining the actuator.
  • the necessary wiring.
The solenoid is energized when the ignition switch is turned to the RUN position, locking the transaxle range selector lever in the PARK position. When the brake pedal is applied and the stoplight switch (13480) is activated, the ignition/shifter interlock actuator is deactivated and the transaxle range selector lever can be moved out of the PARK position.

2001 Lincoln... • Answered on Jan 01, 2020

For all types of power window problem and power windows not working,i suggest you to go through the help links given below.Click the link to go through its procedure to troubleshoot the problem :------

driver side power window problem? http://technoanswers.blogspot.com/2011/06/driver-side-window-problem-on-mercury.html


Driver side power window wont go up? http://howtobyme.blogspot.com/2011/10/driver-side-power-window-wont-go-up-on.html


Power window problemhttp://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html------------

rear door or window will not open ? http://technoanswers.blogspot.com/2011/06/rear-door-or-window-will-not-open-on.html -------------- How to remove door panel, door window motor and regulator ? http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html


Power windows not working after car wash?

http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html---------power locks, power window and power mirror not working?http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.htmlAll power windows not working?http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html------------How to remove window motor and regulator on Volkswagen Car?http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html-------------Complete Diagnosis & Testing Power Windows?



How to replace power window motor in car? http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-power-window-motor-in.html ---------- HOW TO REPLACE A POWER WINDOW SWITCH http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-power-window-switch.html ------------ How to Replace a Window Motor http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-motor.html ---------- HOW TO REPLACE A WINDOW REGULATOR WITH MOTOR http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-window-regulator-with.html --------- HOW TO REPLACE WINDOW RUN CHANNEL SEALS http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-run-channel-seals.html ------- HOW TO REPLACE A WINDOW REGULATOR http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-regulator.html

-----------This will help.Thanks.

2001 Lincoln... • Answered on Apr 04, 2019

No. However the IAC (Idle Air Control) valve could be giving you this problem. Have the IAC checked out. Sometimes the solenoid will cease to function. Also take it off and check for any carbon deposits that may be blocking the idle air bypass ports. The second thing to check would be the EGR valve. Do you have a check engine light? Had the codes read to determine problem codes?

2001 Lincoln... • Answered on Jan 23, 2018

Sometimes valet keys will make the vehicle run in limp mode so no joy riding is possible. Which limp mode limits the power the car will put out while driving.

2001 Lincoln... • Answered on Dec 16, 2017

ABS light come on when this happens ?

2001 Lincoln... • Answered on Dec 13, 2017

The electronic's , control modules , driver door electronic control module ,the lighting control module , SCP serial data communication network . You have no way of fixing this . A factory scan tool would be needed to check communication on the SCP data network . 010 Ford SCP Communications You would need factory service info. to find control moduels , there power an ground circuits to do electrical testing . Voltage drop testing etc.... You could very easily make thing's worst , short out the network an the vehicle will do nothing . You have no idea of the complexity of this .

2001 Lincoln... • Answered on Jun 24, 2017

Does it have an electric fan? They can stop working. don-ohio

2001 Lincoln... • Answered on Mar 12, 2017

There is a diagnostic port that some of the better scanners can use to read the air suspension. It is the cheapest way because you only replace the bad component. The air suspension is designed to let the air out when you either open a door and/or open the trunk. It is attempting to lower the car to make the loading of the trunk and passengers easier. The height levelers are then suppose to recover the ride height and straighten the body to ride level..

2001 Lincoln... • Answered on Jan 28, 2017

Unplug the connector to the compressor and hang it out of the way until hot weather. Describe your heater control panel. don-ohio (:^)

2001 Lincoln... • Answered on Dec 28, 2016

The TCM is integrated into the PCM module. . The PCM/ECM is under hood on the firewall around the master cylinder, there should be two to three bolts that need removal to come out on front side of fire wall. Disconnect the battery negative cable before any work is done.

2001 Lincoln... • Answered on Dec 01, 2016

First thing I would check is the thermostat. You can Google how to take it out. Put it in a pan with boiling water it should open. If it doesn't get a new one. They're usually not that expensive. Hope that helps.

2001 Lincoln... • Answered on Mar 20, 2016

Inside of the door will you will see a small button switch. This switch is what the computer uses to tell if there is an open door and turn on the interior lights. It should be located near the front of the door will and about half way up in the door jam. If you can see which switch is sticking they are simple to remove and replace. They will have a hex shaped bottum that resembles a bolt. Simply turn the old switch out and replace it with a new one readily available at most autopart stores and car dealerships (that have a parts department). You should never attempt to clean or oil any electrical component of a vehicle as this may chase the part to short out and pose a fire hazard. As always if you are unsure of what you are looking for (door jam light switch) please consult a professional. Happy motoring.

2001 Lincoln... • Answered on Mar 15, 2016

Found this firing order. As far as the sensor, you talking about 02 sensor? Bank one has the number 1 cylinder, bank 2 is the other bank, sensor 1 is the first sensor you come to, in the exhaust. 26115688-ott3b3dnywoy0gcbh2wnhfr2-1-0.jpg

2001 Lincoln... • Answered on Mar 02, 2016

This is an insurance claim if you have full coverage. This can be comprehensive damage. Could be that fuel pump relay is melted or brain box is smoked. Other errors will give clue and you need a scan.

2001 Lincoln... • Answered on Sep 26, 2015

Not finding what you are looking for?
2001 Lincoln Continental Logo

339 questions posted

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14869 Answers


Level 3 Expert

4376 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Continental Lincoln

  • Continental Lincoln

Most Popular Question

door ajar warning will not turn off

  • Cars & Trucks