I have installed a sony xplod cd player with a harness adapter. Everything works except the the speakers. The car has a bose system
Yes you need to turn on the BOSE amplifier in the car to hear the sound. The wiring diagram is actually on top of the factory radio
You will need a 12v trigger to turn the amp on. this is assuming you have all the speaker (inputs) connected to the output from your new deck.
SOURCE: i'm looking for a stereo system wiring diagram for
Sir,
Click this link for wiring diagram. If it is not your model let me know
Thanks
Good Luck
Appreciate to rate as "Fixya"
SOURCE: CD player is shot, have to replace entire unit.
Buy a set of VW/Audi stereo removal tools (they are cheap on ebay) you need 4. There are 4 little slots that you insert them into and it will allow the stereo to pull out
SOURCE: rear speakers do not work with aftermarket stereo install
I had the same problem a while back after having a JVC MP£ player fitted at Halfords. The guy told me my sub-woofer behind the back seat wouldn't work with the new stereo which I said was ridiculous, then one of the other guys came to look and told him I needed a different cable to link everything together - then it worked brilliantly.
Sorry I dont know a part number but that is definately your problem.
I hope this helps - or better still that you already have it sorted !!
SOURCE: trying to install a new cd player in my 97 audi a4
Does it have a connector for the stock wiring.. If so they should sell a connector kit at your local stereo dealer or walmart..
If not your black,red,orange/yellow are your main.. and the speaker wires should be the same colors..
782 views
Usually answered in minutes!
×