20 Most Recent
Questions & Answers
How do you disable the baby locks on a 97 Ford
There is a latch inside the frame of the back door. You have to switch
the latch to unlock and they will then allow someone in the back seat
to open the doors.
From www.topix.com /forum/autos
1998 (2000) Expedition....child safety lock often kicked in by itself. SOLVEDI wedged it down with a rubber plug. - ALL OK for ~ 3 years.
Then lock "activated" even with lever DOWN.
All is FINE NOW - see below.
the plastic cover around the lock lever. Spray a light penatrating oil
(wd-40) in and around the lock leaver mechanisim and work the
mechanisim up and down several times. This should free up the small
gravity lock inside the mechanism.
on Sep 30, 2018
What oil is used for 1997 ford explorer
Factory says 5W-30.
You can do better with Walmart's full synthetic 5W-30 with a filter and oil change every 5 - 6,000 miles.
Just keep an eye on oil level - the V8 version of this vehicle does use oil after about 120,000 miles. The 6 is a bit better until about 150,000 miles.
on May 21, 2018
I have a 1997 Ford Explorer Eddie Bauer, having
Many times after hitting bumps or holes in the roads. Loose connection !
Do you know what a wiring diagram is ? Free wiring diagrams here
Enter vehicle info. year , make , model and engine size. Under system click on lighting then under subsystem click on thing's your having problems with . See if they share a common grounding point or a connector in the wiring harness ,power supply etc.... Check by wiggling connections , wiring harness etc.. till you find were you can make the lights go on an off .
on Aug 23, 2017
Not finding what you are looking for?