2005 taurus front wipers won't work

Question edited for clarity.
Question moved to correct year make model category.

Check the fuses and relays.

Ford Taurus (2000-2007) fuses and relays

https://fuse-box.info > ford > ford-taurus-2000-2007-fu...

2003 - Here you will find fuse box diagrams of Ford Taurus 2000, 2001, 2002, 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse ...

2003 Ford Taurus fuse box diagram - StartMyCar

https://www.startmycar.com > Taurus > Fuse box
The 2003 Ford Taurus has 2 different fuse boxes: Passenger compartment fuse panel diagram. Power distribution box diagram. * Ford Taurus fuse box diagrams ...

Ford Taurus (1999 - 2007) - fuse box diagram - Auto Genius

https://www.autogenius.info > ford-taurus-1999-2007-f...
Jul 2, 2018 - Ford Taurus (1999 - 2007) - fuse box diagram. Year of production: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 ...

Rear Wiper/Washer System Components
The rear wiper/washer system consists of the following components:
• Rear wiper/washer switch
• Window wiper module-rear
• Window washer pump-rear
• RR WIPER 15A fuse
• RR WPRB 25A fuse
Rear Wiper/Washer System Operation
The rear wiper module controls rear wiper motor operation. Battery voltage supplied to the module is used to operate the wiper motor in all modes and to return the rear wiper arm to the park position after the ignition is turned off. Accessory voltage supplied to the rear wiper/washer switch is used to supply the rear window wiper and washer switch signal circuits. In wiper switch positions 1 and 2 the wiper switch signal circuit voltage level to the wiper motor module determines the wiper motor delay interval. The rear window washer pump supply voltage circuit is used to provide the operating voltage for the rear washer pump for as long as the rear washer switch is pressed. The rear window washer switch signal circuit is used as a wash signal to the rear wiper motor module to operate the wipers during the rear wash operation.


Did you replace the rear wiper module ?

Replacing parts just to replace them wont fix a bad wire or part. Better to use a voltmeter and ohn meter to check if your getting power to the wires. You may have a bad connection or bad switch on the column for the pumps. Without checking the circuits it will behard to tell what it is thats wrong. Find a wiring diagram and trace the wires and components.

Your wiper and wiper fluid motors are different operation. The fluid one is a pump and the wiper motor only operates the wipers. Should check and see if you are getting power to the wiper motor if you are and the wiper does not work then you may need a new wiper motor.

does the washer pump work.

replace the COMBINATION SWITCH

probably a fuse is there anything else not working? fuse guide is in your owners manual and is a cheap do it yourself fix however it could be your wiper motor or a wire leading too.

this is no easy trouble shoot! GM put a few thing on there that could cause a problem . First there is a pulse bourd on the wiper motor that could go bad . second it could be that that part of the switch has went bad , check the fuses . Hope this can be of some help to you !!

This may be multi-function switch failure. The multi-function is the turn signal/wiper/headlight switch. It may need to be replaced. Is this the type of switch you have. Hope this helps. If it is not the switch then the pump may be bad or have a bad wire connection.
GOOD LUCK

Check the Relay in the Battery Junction box it is the 3rd one from edn oposite if 3 small fuses close to it with a 5 amr fuse in the middle. Hope this helps it realy should from the sounds of it

PLEASE RATE My ANSWER