What kind of transmission fluid do you put in a Mitsubishi

Easiest thing to do is to measure it when you drain it and put that much back in

You need 9.8 quarts of Dexron III or later, for a dry fill. A wet service fill will be less, about 6-7 quarts. Autozone or any other auto spares outlet will have it.

Here's a video showing you how to add windshield fluid,will make you watch a commercial,lol. Add Windshield Washer Fluid Mitsubishi Montero Sport 1997 2004 1997...

How to Change Transmission Fluid Step by Step Check this link to know more.
Gopakumar Gopalan Google

Hi there:On 1998 Mitsubishi Truck Montero Sport 4WD 3.0L MFI 6cyl check this Transmission Fluid Type/Capacity information:
Application: With automatic transmission

AW30-40LE transService change only - 2.3 quarts. Total refill - 10.4 quarts.



Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Hi,
You need about 3.5 quarts or until the filing hole drips when putting the gear oil. SAE 90W is required, add some aftermarket lubricant additive for best result.
Hope that helps you!

Not familiar with montero , but generaly speaking , automatic transmissions are filled , or toped up through the tube where the transmission dipstick is. Hope this helps. Make SURE you use the correct trans fluid , there are several different kinds. The recomended fluid is usualy marked on the dipstick.

the smell of trans fluid indicates that it's overheating, either needs changing, if your lucky, or a more involve drepair , get the OBD codes read

Ok, Mobil atf is more of a universal fluid, where Mitsubishi atf would be specifically formulated to be used in their products. Personally I would use the Mitsubishi as it is brand specific, but you can use either one with more than likely no problems.

I believe it means that your transmission fluid is either getting too hot, or there's not enough fluid